Page 26 / 181
Scroll up to view Page 21 - 25
21
D-Link DIR-890L User Manual
Section 3 - Configuration
QRS Mobile App
QRS Mobile app allows you to install and configure your router from your mobile device.
Wi-Fi Name(SSID) 2.4Ghz:
dlink-xxxx
Wi-Fi Name(SSID) 5GHz:
dlink-xxxx-5GHz
Password: xxxxxxxx
To configure your router, go to:
Username: “Admin”
Password:” “ (leave the field blank)
Step 1
Search for the free
QRS Mobile
app on the iTunes Store or Google Play.
Step 2
Once the app is installed on your mobile device, you may configure your
router. Connect to the router wirelessly by going to your wireless utility on
your device. Scan for the
Wi-Fi Name
(SSID) as listed on the supplied Wi-Fi
Configuration card. Select and then enter your Wi-Fi password.
Step 3
Once you connect to the router, launch the QRS mobile app from the
Home screen of your device.
For the iTunes Store, you may
also scan this code to download.
For Google Play, you may also
scan this code to download.
Page 27 / 181
22
D-Link DIR-890L User Manual
Section 3 - Configuration
Step 4
You will see the welcome screen. Tap
Start
to proceed. When the
Operation
Mode
screen appears, tap
Next
.
Step 5
At this point, make sure that your router is connected to a modem.
Plug
one end of the provided Ethernet cable into your DSL or cable modem,
and plug the other end into the port marked INTERNET on the DIR-890L.
Tap
Next
to automatically detect your Internet connection and proceed
to the next step.
Page 28 / 181
23
D-Link DIR-890L User Manual
Section 3 - Configuration
Step 6
You will be prompted to set up each wireless frequency band; the 2.4GHz
band followed by the 5GHz band.
A - Enter a
Network Name
(SSID) of your choice, or you may leave
it unchanged to accept the default SSID. Each wireless band
can be assigned its own SSID.
B - Choose a Wi-Fi
Password
of at least eight characters. You will
need to enter this password the first time you connect any
device to the router wirelessly.
Tap
Next
to proceed.
Step 7
Enter the
Device Password
(Admin Password
) of your choice. Unlike the
Wi-Fi password, this password is only required when you need to configure
the router. Refer to
"Web-based Configuration Utility" on page 26
to
learn how this password is used. Tap
Next
to proceed.
Page 29 / 181
24
D-Link DIR-890L User Manual
Section 3 - Configuration
Step 8
If you already have a mydlink account, select
Yes, I have a mydlink
account
. Tap
Sign In
to set up the router to use your mydlink account.
If you do not have a mydlink account, select
No, I want to create a new
mydlink account
. You must provide your email address, choose a mydlink
password and check the
I accept the mydlink terms and conditions
check box. Tap
Register
to create your new mydlink account.
If you do not want to configure your router with mydlink at this point, tap
Skip
to proceed.
Step 9
If you would like to receive notification whenever a new firmware update
is available, check the
Notify me when new firmware is available
check
box and tap
Next
.
Otherwise, just tap
Next
to proceed.
Page 30 / 181
25
D-Link DIR-890L User Manual
Section 3 - Configuration
Step 10
You will see a summary of your chosen settings. If you need to make any
changes, tap
Back
to step back through the previous pages.
Otherwise, tap
Next
to complete the setup.
Congratulations, your device has been successfully configured! You may
now exit the QRS Mobile app.
19216811.live