Page 26 / 215
Scroll up to view Page 21 - 25
21
D-Link DIR-866L User Manual
Section 3 - Configuration
QRS Mobile App
The QRS Mobile app allows you to install and configure your router from your iPad, iPhone (iOS 4.3 or higher), or Android device.
Step 1
From your iPad, iPhone, or Android device, go to the
iTunes Store
and search for
D-Link
. Select
QRS Mobile
and then download it.
You may also find the app by scanning the QR code below with
a QR code reader.
Step 2
Once your app is installed, you may now configure your router.
Connect to the router wirelessly by going to your wireless utility
on your device. Scan for the wireless network name (SSID) as
listed on the supplied info card. Select and then enter your
security password (Wi-Fi Password).
Step 3
Once you connect to the router, launch the
QRS Mobile
app
and it will guide you through the installation and configuration
of your router.
iOS
Android
Wi-Fi Name(SSID) 2.4Ghz:
dlink-xxxx
Wi-Fi Name(SSID) 5GHz:
dlink-xxxx-5GHz
Password: xxxxxxxx
To configure your router, go to:
Username: “Admin”
Password:” “ (leave the field blank)
Page 27 / 215
22
D-Link DIR-866L User Manual
Section 3 - Configuration
Web-based Configuration Utility
Enter your
Password
and click
Login
.
Note:
If you did not create a password with the Setup Wizard,
leave the password blank by default.
Open a web browser (e.g., Internet Explorer, Chrome, Firefox , or Safari)
and enter
or the IP address of the router
(
192.168.0.1
).
Page 28 / 215
23
D-Link DIR-866L User Manual
Section 3 - Configuration
Internet Connection Setup
If you want to configure your router to connect to the Internet using
the wizard, click
Internet Connection Setup Wizard
. Refer to
“Internet
Connection Setup Wizard” on page 32
.
If you consider yourself an advanced user, click
Manual Internet
Connection Setup
to configure your connection manually. (Instructions
for manual setup begin below.)
The next few pages explain each of the ISP connection types. You can
select the type from the
My Internet Connection is
drop-down menu.
Page 29 / 215
24
D-Link DIR-866L User Manual
Section 3 - Configuration
Select
Static IP
to manually enter the IP settings supplied
by your ISP (Internet Service Provider).
Check the box to
Enable True Gigabit Routing Connectivity.
Enter the
IP Address
assigned by your ISP.
Enter the
Subnet Mask
assigned by your ISP.
Enter the
Default Gateway
assigned by your ISP.
The DNS server information will be supplied by your ISP.
Maximum Transmission Unit - you may need to change the
MTU for optimal performance with your specific ISP. 1500 is
the default MTU.
The default MAC Address is set to the Internet port’s physical
interface MAC address on the Broadband Router. It is not
recommended that you change the default MAC address
unless required by your ISP.
You can click on
Copy Your PC’s
MAC Address
to replace the Internet port’s MAC address
with the MAC address of your Ethernet card.
My Internet
Connection is:
True Gigabit Routing
Connectivity Setting:
IP Address:
Subnet Mask:
Default Gateway:
DNS Servers:
MTU:
MAC Address:
Manual Internet Setup
Static (assigned by ISP)
Select
Static IP
if all the IP information is provided to you by your ISP.
Page 30 / 215
25
D-Link DIR-866L User Manual
Section 3 - Configuration
Select
Dynamic IP (DHCP)
to obtain IP Address information
automatically from your ISP. This option is commonly used for cable
modem services.
Check the box to
Enable True Gigabit Routing Connectivity.
The
Host Name
is optional but may be required by some ISPs. Leave
blank if you are not sure.
Check the box if you are having problems obtaining an IP address
from your ISP.
Enter the Primary and Secondary DNS server IP addresses assigned
by your ISP. These addresses are usually obtained automatically
from your ISP. Leave blank if you did not specifically receive these
from your ISP.
Maximum Transmission Unit - you may need to change the MTU for
optimal performance with your specific ISP. 1500 is the default MTU.
The default MAC Address is set to the Internet port’s physical
interface MAC address on the Broadband Router. It is not
recommended that you change the default MAC address unless
required by your ISP.
You can click on
Copy Your PC’s MAC Address
to replace the Internet port’s MAC address with the MAC address
of your Ethernet card.
My Internet
Connection is:
True Gigabit Routing
Connectivity Setting:
Host Name:
Use Unicasting:
Primary/Secondary
DNS Server:
MTU:
MAC Address:
Internet Setup
Dynamic (Cable)
19216811.live