Page 106 / 215
Scroll up to view Page 101 - 105
101
D-Link DIR-866L User Manual
Section 3 - Configuration
Click the
Save
Configuration
button to save the current
router configuration settings to a file on the hard disk
of the computer you are using. A file dialog will appear,
allowing you to select a location and file name for the
saved settings.
Use this option to load previously saved router
configuration settings. First, click on
Browse
to find a
previously saved file of configuration settings. Then, click
the
Restore Configuration from File
button to transfer
those settings to the router.
This option will restore all configuration settings back
to the settings that were in effect at the time the router
was shipped from the factory. Any settings that have
not been saved will be lost, including any rules that
you have created. If you want to save the current router
configuration settings first, use the
Save Configuration
button above.
Click
Reboot the Device
to reboot the router.
Save Settings to
Local Hard Drive:
Load Settings
from Local Hard
Drive:
Restore to
Factory Default
Settings:
Reboot
the
Device:
System
This section allows you to manage the router’s configuration settings, reboot the router, and restore the router to the factory
default settings. Restoring the unit to the factory default settings will erase all settings, including any rules that you’ve created.
Page 107 / 215
102
D-Link DIR-866L User Manual
Section 3 - Configuration
Firmware
Browse:
Upload:
After you have downloaded new firmware, click
Browse
to locate the firmware update on your hard drive.
Once you have located the file on your computer, click
the
Upload
button to start the firmware upgrade.
From this screen you can check to see if there is a firmware upgrade available, and then you can download the latest firmware
for your router. Make sure you download the firmware you want to use onto the local hard drive of your computer.
After you have downloaded a new language pack, click
Browse
to locate the language pack file on your hard
drive.
Once you have located the file on your computer, click
the
Upload
button to start the language pack upgrade.
Language Pack Upgrade
You can change the language of the web UI by uploading
available language packs.
Browse:
Upload:
Firmware Upgrade
Firmware and
Language Pack
Information:
Displays
Current Firmware Version
and Current
Language
Pack
Version
. Click
Check Now
to check online for the
latest versions.
Page 108 / 215
103
D-Link DIR-866L User Manual
Section 3 - Configuration
Dynamic Domain Name System (DDNS) is a method
of keeping a domain name linked to a changing IP
Address. Check the box to
Enable
DDNS.
Select your DDNS provider from the drop-down
menu or enter the DDNS
Server Address
.
Enter the
Host Name
that you registered with your
DDNS service provider.
Enter the
Username or Key
for your DDNS account.
Enter the
Password or Key
for your DDNS account.
Re-enter to verify the password.
Enter a
Timeout
time (in hours).
Displays the current connection status.
Continue to the next page for DDNS for IPv6 Hosts.
Enable
Dynamic DNS:
Server
Address:
Host Name:
Username or
Key:
Password or
Key:
Timeout:
Status:
Dynamic DNS
The Dynamic DNS (DDNS) feature allows you to host a server (Web, FTP, Game Server, etc…) using a domain name that you
have purchased (www.whateveryournameis.com) with your dynamically assigned IP address. Most broadband Internet Service
Providers assign dynamic (changing) IP addresses. Using a DDNS service provider, your friends can enter in your domain name
to connect to your server no matter what your IP address is.
Page 109 / 215
104
D-Link DIR-866L User Manual
Section 3 - Configuration
IPv6
Address:
Host Name:
Enter the
IPv6 Address
of your computer/server in
your local network. You can select a computer/server
from the drop-down list and click the
<<
button.
Enter the IPv6
Host Name
that you registered with
your DDNS service provider. Click
Save
.
Dynamic DNS for IPv6 Hosts
IPv6 Dynamic
DNS List:
Enable:
Host Name:
IPv6 Address:
Edit/Delete:
Once you save your entry, the IPv6 DDNS host
information will be displayed in this list.
Check to
Enable
the entry.
Displays the
Name
of your IPv6 DDNS host.
Displays the
IPv6 Address
of your computer/server
associated with the IPv6 DDNS host.
Click the
Edit
icon to make changes to the entry or
click the
Trash
icon to delete the entry.
Click
Save Settings
.
Page 110 / 215
105
D-Link DIR-866L User Manual
Section 3 - Configuration
Enter the
Host Name
or
IP Address
of the computer
that you wish to Ping and click
Ping
.
Enter the
Host Name
or
IPv6 Address
of the computer
that you wish to Ping and click
Ping
.
The results of your ping attempts will be displayed here.
System Check
Host Name or IP
Address:
Host Name or
IPv6 Address:
Ping Result:
The Ping Test is used to send Ping packets to test if a computer is on the Internet.
19216811.live