Page 101 / 215
Scroll up to view Page 96 - 100
96
D-Link DIR-866L User Manual
Section 3 - Configuration
IPv6 Routing
Check the box to the left of the
Name
of the route you wish
to enable.
Enter a specific
Name
to identify this route.
This is the IP address of the router used to reach the specified
destination, or enter the IPv6 address prefix length of the
packets that will take this route.
Enter the
Metric
value for this rule, which indicates the cost
of using this route.
Use the drop-down menu to specify whether the IP packet
must use the
WAN
or
LAN
interface to transit out of the router.
Enter the IP address of the router, if any, used to reach the
specified destination.
Click
Save Settings
.
Route List:
Name:
Destination IPv6/
Prefix Length:
Metric:
Interface:
Gateway:
This screen allows you to specify custom routes that determine how data is moved around your network.
Page 102 / 215
97
D-Link DIR-866L User Manual
Section 3 - Configuration
Admin
This screen allows you to change the Administrator settings, and also to enable remote management.
Tools
Enter a new
Password
for the Admin account. Enter it again to verify the
password.
Enter a system name.
Check to
Enable
a challenge-response test requiring users to type characters
from a distorted image displayed on the screen to prevent hackers and
unauthorized users from gaining access to your router’s network settings.
Check to
Enable HTTPS
to connect to the router securely. This means to
connect to the router, you must enter
https
://192.168.0.1
(for example)
instead of
http
://192.168.0.1
.
Check to
Enable Remote Management
, which allows the DIR-866L to
be configured from the Internet using a web browser. A username and
password is still required to access the Web Management interface.
Enter the port number used in the URL to access the DIR-866L. For example:
where x.x.x.x is the Internet IP address of the DIR-866L
and 8080 is the port used for the Web Management interface.
If you
check the box to enable the
HTTPS Server,
you must enter
https://
as part of the URL to access the router remotely.
Select
Allow All
or
Deny All
from the drop-down menu.
This field will display the current
Remote Admin Inbound Filter
.
Click
Save Settings
.
Admin Password:
Gateway Name:
Enable Graphical
Authentication:
Enable HTTPS
Server:
Enable Remote
Management:
Remote Admin Port:
Remote Admin
Inbound Filter:
Details:
Page 103 / 215
98
D-Link DIR-866L User Manual
Section 3 - Configuration
Time
Displays the current date and time of the router’s
internal system clock.
Select your
Time Zone
from the drop-down menu.
Check the box to
Enable
manual entry of Daylight
Saving time.
Enter a Daylight Saving
Start
date and
End
date. Specify
a
Day of the Week
, and a
Time
.
Check the box to
Enable
NTP (Network Time Protocol)
server.
Select an NTP server from the drop-down menu.
To manually input the time, enter the values for the
Year
,
Month
,
Day
,
Hour
,
Minute
, and
Second
. Or click
Copy Your Computer’s Time Settings
to synch the
date and time with the computer you are currently on.
Click
Save Settings
.
Time:
Time Zone:
Enable Daylight
Saving:
Daylight Saving
Dates:
Enable NTP Server:
NTP Server Used:
Set the Time and
Date Manually:
The Time Configuration option allows you to configure, update, and maintain the correct time on the internal system clock.
From this section you can set the time zone that you are in and set the
NTP
(for Network Time Protocol)
Server
. An NTP server
will sync the time and date with your router.
Page 104 / 215
99
D-Link DIR-866L User Manual
Section 3 - Configuration
SysLog
The DIR-866L keeps a running log of events and activities occurring on the Router. You may send these logs to a SysLog server
on your network.
Enable Logging to
SysLog Server:
Check this box to
Enable
sending the router logs to a
SysLog Server. You will see a new field for the
SysLog
Server IP Address
.
Enter the
IP Address
of the Syslog server that will be
used for sending the logs to. You may also select your
Computer Name
from the drop-down menu (only
if receiving an IP address from the router via DHCP).
Click
Save Settings
.
SysLog Server
IP Address:
Page 105 / 215
100
D-Link DIR-866L User Manual
Section 3 - Configuration
Email Settings
The Email Settings screen is for sending system log files, router alert messages, and firmware update notifications to your e-mail address.
Enable Email
Notification:
From Email Address:
To Email Address:
SMTP Server Address:
SMTP Server Port:
Enable Authentication:
Account Name:
Password:
On Log Full:
On Schedule:
Schedule:
Details:
Check to
Enable Email Notification
. Router activity logs are sent to
the e-mail address designated under
Email Settings
heading.
Enter the
Email Address
you would like to display as the sender when
you receive a log file or firmware upgrade notification via e-mail.
Enter the
Email Address
where you want the e-mail to be sent.
Enter the
SMTP Server Address
for sending e-mail.
Enter the SMTP port used on the server.
Check this box if your SMTP server requires authentication.
Enter your
Account Name
for sending e-mail.
Enter the
Password
associated with the account. Re-type the
password for verification.
When this box is checked, logs will be sent via e-mail to your account
when the log is full.
When this box is checked, logs will be sent via e-mail according to
schedule.
When the box by
On Schedule
is checked, you can select
Never
or
choose a schedule from the drop-down menu. To create a schedule,
go to
Tools > Schedules
.
Detail will display the selected schedule.
Click
Save Settings
.
19216811.live