Page 71 / 215
Scroll up to view Page 66 - 70
66
D-Link DIR-866L User Manual
Section 3 - Configuration
Static IPv6
Select
Static IPv6
from the drop-down menu.
Enter the IPv6 address information supplied by your Internet
Service Provider (ISP).
Enter the LAN (local) IPv6 address for the router.
Displays the router’s
LAN IPv6 Link-Local Address.
Check to enable the Autoconfiguration feature.
Select
SLAAC + RDNSS,
SLAAC + Stateless DHCPv6,
or
Stateful DHCPv6
.
Enter the start IPv6 Address for the DHCPv6 range for your
local computers.
Enter the end IPv6 Address for the DHCPv6 range for your
local computers.
Enter the
Router Advertisement Lifetime
(in minutes).
Click
Save Settings
.
My IPv6 Connection is:
WAN IPv6 Address
Settings:
LAN IPv6 Address:
LAN IPv6 Link-Local
Address:
Enable Automatic IPv6
address assignment:
Autoconfiguration Type:
IPv6 Address Range
Start:
IPv6 Address Range
End:
Router Advertisement
Lifetime:
Page 72 / 215
67
D-Link DIR-866L User Manual
Section 3 - Configuration
Autoconfiguration
Select
Autoconfiguration (SLAAC/DHCPv6)
from the drop-
down menu.
Select either
Obtain a DNS server address automatically
or
Use the following DNS address
.
Enter the primary and secondary DNS server addresses.
Check this box to enable DHCP prefix delegation.
Enter the LAN (local) IPv6 address for the router.
Displays the router’s
LAN
IPv6 Link-Local Address
.
Check to enable the Autoconfiguration feature.
Check to enable delegation of prefixes for router addresses.
Select
SLAAC + RDNSS
or
SLAAC + Stateless DHCP,
or
Stateful DHCPv6
.
Enter the start IPv6 Address for the DHCPv6 range for your
local computers.
Enter the end IPv6 Address for the DHCPv6 range for your
local computers.
Enter the
Router Advertisement Lifetime
(in minutes).
Click
Save Settings
.
My IPv6 Connection is:
IPv6 DNS Settings:
Primary/Secondary DNS
Server:
Enable DHCP-PD:
LAN IPv6 Address:
LAN IPv6 Link-Local
Address:
Enable automatic IPv6
address assignment:
Enable Automatic
DHCP-PD in LAN:
Autoconfiguration Type:
IPv6 Address Range
Start:
IPv6 Address Range
End:
Router Advertisement
Lifetime:
Page 73 / 215
68
D-Link DIR-866L User Manual
Section 3 - Configuration
PPPoE
Select
PPPoE
from the drop-down menu.
Enter the PPPoE account settings supplied by your Internet
provider (ISP).
Select
Create a new session
if you have IPv6.
Select
Static IP
if your ISP assigned you the IP address, subnet
mask, gateway, and DNS server addresses. In most cases, select
Dynamic IP
.
Enter the
IP Address
(Static PPPoE only).
Enter your PPPoE
Username
.
Enter your PPPoE
Password
and then retype the password in the
next box.
Enter the ISP
Service Name
(optional).
Select either
Always-on
,
On-Demand
, or
Manual
.
Enter a
Maximum Idle Time
during which the Internet connection
is maintained during inactivity. To disable this feature, enable
Auto-reconnect.
Maximum Transmission Unit - you may need to change the MTU for
optimal performance with your specific ISP. 1492 is the default MTU.
Select either
Obtain IPv6 DNS servers automatically
or
Use the
following IPv6 DNS servers
Enter the primary and secondary DNS server addresses.
My IPv6 Connection is:
PPPoE Internet
Connection Type:
PPPoE Session:
Address Mode:
IP Address:
Username:
Password:
Service Name:
Reconnect Mode:
Maximum Idle Time:
MTU:
IPv6 DNS Settings:
Primary/Secondary DNS
Servers:
Page 74 / 215
69
D-Link DIR-866L User Manual
Section 3 - Configuration
Enable DHCP-PD:
LAN IPv6 Address:
LAN IPv6 Link-Local
Address:
Enable Automatic IPv6
address assignment:
Enable Automatic DHCP-
PD in LAN:
Autoconfiguration Type:
IPv6 Address Range Start:
IPv6 Address Range End:
Router Advertisement
Lifetime:
Check this box to enable DHCP prefix delegation.
Enter the LAN (local) IPv6 address for the router.
Displays the router’s
LAN IPv6 Link-Local Address
.
Check to enable the IPv6 Autoconfiguration.
Check to enable delegation of prefixes for router addresses.
Select
SLAAC + RDNSS
or
SLAAC + Stateless DHCPv6,
or
Stateful DHCPv6
.
Enter the start IPv6 Address for the DHCPv6 range for your
local computers.
Enter the end IPv6 Address for the DHCPv6 range for your
local computers.
Enter the
Router Advertisement Lifetime
(in minutes).
Click
Save Settings
.
Page 75 / 215
70
D-Link DIR-866L User Manual
Section 3 - Configuration
IPv6 in IPv4 Tunnel
Select
IPv6 in IPv4 Tunnel
from the drop-down menu.
Enter the settings supplied by your Internet provider (ISP).
Select either
Obtain a DNS server address automatically
or
Use the following DNS address
.
Enter the primary and secondary DNS server addresses.
Check this box to enable DHCP prefix delegation.
Enter the LAN (local) IPv6 address for the router.
Displays the router’s
LAN Link-Local Address
.
Check to enable the Autoconfiguration feature.
Check to enable delegation of prefixes for router addresses.
Select
SLAAC + RDNSS
or
SLAAC + Stateless DHCP,
or
Stateful
DHCPv6
.
Enter the start IPv6 Address for the DHCPv6 range for your local
computers.
Enter the end IPv6 Address for the DHCPv6 range for your local
computers.
Enter the
Router Advertisement Lifetime
(in minutes).
Click
Save Settings
.
My IPv6 Connection is:
IPv6 in IPv4 Tunnel
Settings:
IPv6 DNS Settings:
Primary/Secondary
IPv6 DNS Servers:
Enable DHCP-PD:
LAN IPv6 Address:
LAN IPv6 Link-Local
Address:
Enable Automatic IPv6
Address Assignment:
Enable Automatic
DHCP-PD in LAN:
Autoconfiguration
Type:
IPv6 Address Range
Start:
IPv6 Address Range
End:
Router Advertisement
Lifetime:
19216811.live