Page 61 / 215 Scroll up to view Page 56 - 60
56
D-Link DIR-866L User Manual
Section 3 - Configuration
Click on
Setup
>
Storage
and select
SharePort Mobile/Web Access Manual Setup
. This will allow you to set up remote access
to files on a USB external hard drive or thumb drive that is plugged into the router, from the Internet using a web browser, or
using the SharePort app on your smartphone or tablet. Step-by-step instructions begin on the next page.
Check the box to enable file sharing on your USB storage
device that is plugged in your router.
Enter a port (8181 by default). You will have to enter this port
in the URL when connecting to the shared files. For example:
(
).
Enter a port (4433 by default). You will have to enter this port
in the URL when connecting to the shared files. For example:
(
).
Check this option to allow remote access to this router.
To create a new user, enter a
User Name
.
Enter a
Password
for this account.
Re-enter the
Password
. Click
Add/Edit
to create the user.
Displays the user accounts. The Admin and Guest accounts
are built-in to the router.
Displays the USB device(s) plugged into the router.
Click
Save Settings
.
Enable SharePort
Web Access:
HTTP Access Port:
HTTPS Access
Port:
Allow Remote
Access:
User Name:
Password:
Verify Password:
User List:
Number of
Devices:
SharePort Mobile Manual Setup
Page 62 / 215
57
D-Link DIR-866L User Manual
Section 3 - Configuration
Access Files from the Internet
Below are step-by-step instructions on how to access files from the Internet from your USB drive or external hard drive that is connected to your
DIR-866L router:
Step 1 - Enable SharePort Web Access
Under
SharePort Web Access
, check
Enable SharePort Web Access
.
The default port for HTTP is 8181 and HTTPS (secure) is 4433. You can
change the port(s) for HTTP or HTTPS.
Step 2 - Create a User Account
Under
User Creation
, enter a
User Name
and
Password
. Verify
Password
and then click
Add/Edit
.
Step 3 - Configure your Access Path
Under
User List
, click the
Edit
icon for the user you just created. You will
see an
Append New Folder
window with the name of the new user in
the
User Name
field. Click on
Browse
to locate the folder on your USB
storage device or external hard drive for which you want to assign
access to the user.
Step 4 - Save Settings
If you want to add more users, repeat steps 2 and 3. Once you are
finished, click the
Save Settings
button at the top of the screen to
save your settings.
Note:
The
Storage Device Link
(at the bottom) will display the URL(s)
you can use to connect.
If you want to use HTTPS to get a secure connection, you must type
in
HTTPS://
instead of
HTTP://
. Remember to type the port number
after the colon. For example, if you selected HTTPS and changed the
port to 3200, and your WAN IP address is 1.2.3.4, then you would enter
HTTPS://1.2.3.4:3200
to connect.
Page 63 / 215
58
D-Link DIR-866L User Manual
Section 3 - Configuration
IPv6
On this page, the user can configure the IPv6 Connection type. There are three ways to set up the IPv6 Internet connection.
For the beginner that has never configured a router before, click
on the
IPv6 Internet Connection Setup Wizard
button and
the router will guide you through a few simple steps to get your
network up and running. (Refer to
“IPv6 Internet Connection Setup
Wizard” on page 60
.)
For the advanced user that has experience with configuring a
router, click on the
Manual IPv6 Internet Connection Setup
button to input all the settings manually. (Refer to
“IPv6 Manual
Setup” on page 65
.)
If you would like to manually configure the IPv6 local connectivity
settings of your router, click on
IPv6 Local Connnectivity Settings
.
Proceed to the instructions on the next page.
Page 64 / 215
59
D-Link DIR-866L User Manual
Section 3 - Configuration
Click on
Enable ULA.
You can check
Use default ULA prefix
, or
you can leave the box unchecked and enter the prefix manually
in the
ULA Prefix
text box.
Click
Save Settings
.
Page 65 / 215
60
D-Link DIR-866L User Manual
Section 3 - Configuration
IPv6 Internet Connection Setup Wizard
Click on
Setup
>
IPv6
and select
IPv6 Internet Connection Setup Wizard
.
You can configure the IPv6 connection type using the
step-by-step instructions from the
setup wizard.
Click
IPv6 Internet Connection Setup Wizard
, and you will be guided through a
few simple steps to get your network up and running.
When the Welcome screen appears, click
Next
to continue.

Rate

4 / 5 based on 1 vote.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top