31

D-Link DIR-826L User Manual

Section 3 - Configuration

Select

PPPoE.(Username/Password)

from the drop-down menu.

Advanced Domain Name System (DNS) services enhances your Internet

performance by getting you the information and web pages you are looking

for faster and more reliably. In addition, it improves your overall Internet

experience by correcting many common typo mistakes automatically, taking

you where you intended to go and saving you valuable time.

Disclaimer:

D-Link makes no warranty as to the availability, reliability, functionality

and operation of the Advanced DNS service or its features.

Check to enable true Gigabit routing. This will increase the through-put of

the WAN-LAN connectivity of the router.

Select

Static.IP

if your ISP assigned you the IP address, subnet mask, gateway,

and DNS server addresses. In most cases, select

Dynamic

.

Enter the IP address (Static PPPoE only).

Enter your PPPoE user name.

Enter your PPPoE password and then retype the password in the next box.

Enter the ISP Service Name (optional).

Select either

Always-on

,

On-Demand

, or

Manual

.

My Internet

Connection:

Enable

Advanced DNS

Service:

Enable True

Gigabit Routing

Connectivity:

Address Mode:

IP Address:

User Name:

Password:

Service Name:

Reconnect

Mode:

Internet Setup

PPPoE (DSL)

Choose PPPoE (Point to Point Protocol over Ethernet) if your ISP uses a PPPoE connection. Your ISP will provide you with a

username and password. This option is typically used for DSL services. Make sure to remove your PPPoE software from your

computer. The software is no longer needed and will not work through a router.

32

D-Link DIR-826L User Manual

Section 3 - Configuration

Maximum

Idle Time:

DNS

Addresses:

MTU:

MAC Address:

Enter a maximum idle time during which the Internet connection is maintained during inactivity. To disable this feature, enable

Auto-reconnect.

Enter the Primary and Secondary DNS Server Addresses (Static PPPoE only).

Maximum Transmission Unit - you may need to change the MTU for optimal performance with your specific ISP. 1492 is the default

MTU.

The default MAC Address is set to the Internet port’s physical interface MAC address on the Broadband Router. It is not recommended

that you change the default MAC address unless required by your ISP.

You can use the

Copy.Your.PC’s.MAC.Address

button to

replace the Internet port’s MAC address with the MAC address of your Ethernet card.

33

D-Link DIR-826L User Manual

Section 3 - Configuration

Select

PPTP.(Username/Password)

from the drop-down menu.

Advanced Domain Name System (DNS) services enhances your Internet

performance by getting you the information and web pages you

are looking for faster and more reliably. In addition, it improves your

overall Internet experience by correcting many common typo mistakes

automatically, taking you where you intended to go and saving you

valuable time.

Disclaimer:

D-Link makes no warranty as to the availability, reliability,

functionality and operation of the Advanced DNS service or its features.

Check to enable true Gigabit routing. This will increase the throughput

of the WAN-LAN connectivity of the router.

Select

Static

if your ISP assigned you the IP address, subnet mask,

gateway, and DNS server addresses. In most cases, select

Dynamic

.

Enter the IP address (Static PPTP only).

Enter the Primary and Secondary DNS Server Addresses (Static PPTP

only).

Enter the Gateway IP Address provided by your ISP.

Enter the Server IP provided by your ISP (optional).

Internet Setup

PPTP

Choose PPTP (Point-to-Point-Tunneling Protocol ) if your ISP uses a PPTP connection. Your ISP will provide you with a username

and password. This option is typically used for DSL services.

My Internet

Connection:

Enable

Advanced DNS

Service:

Enable True

Gigabit Routing

Connectivity:

Address Mode:

PPTP IP Address:

PPTP Subnet

Mask:

PPTP Gateway:

PPTP Server IP:

34

D-Link DIR-826L User Manual

Section 3 - Configuration

Enter your PPTP username.

Enter your PPTP password and then retype the password in the next box.

Select either

Always-on

,

On-Demand

, or

Manual

.

Enter a maximum idle time during which the Internet connection is maintained during inactivity. To disable this feature, enable

Auto-reconnect.

The DNS server information will be supplied by your ISP (Internet Service Provider.)

Maximum Transmission Unit - you may need to change the MTU for optimal performance with your specific ISP. 1400 is the default

MTU.

The default MAC Address is set to the Internet port’s physical interface MAC address on the Broadband Router. It is not recommended

that you change the default MAC address unless required by your ISP.

You can use the

Clone.Your.PC’s.MAC.Address

button to

replace the Internet port’s MAC address with the MAC address of your Ethernet card.

Username:

Password:

Reconnect

Mode:

Maximum Idle

Time:

DNS Servers:

MTU:

MAC Address:

35

D-Link DIR-826L User Manual

Section 3 - Configuration

Select

L2TP.(Username/Password)

from the drop-down menu.

Advanced Domain Name System (DNS) services enhances your

Internet performance by getting you the information and web

pages you are looking for faster and more reliably. In addition,

it improves your overall Internet experience by correcting many

common typo mistakes automatically, taking you where you

intended to go and saving you valuable time.

Disclaimer:

D-Link makes no warranty as to the availability,

reliability, functionality and operation of the Advanced DNS service

or its features.

Check to enable true Gigabit routing. This will increase the

through-put of the WAN-LAN connectivity of the router.

Select

Static

if your ISP assigned you the IP address, subnet

mask, gateway, and DNS server addresses. In most cases, select

Dynamic

.

Enter the L2TP IP address supplied by your ISP (Static only).

Enter the Subnet Mask supplied by your ISP (Static only).

Enter the Gateway IP Address provided by your ISP.

Enter the Server IP provided by your ISP (optional).

My Internet

Connection:

Enable

Advanced DNS

Service:

Enable True

Gigabit Routing

Connectivity:

Address Mode:

L2TP IP Address:

L2TP Subnet

Mask:

L2TP Gateway:

L2TP Server IP:

Internet Setup

L2TP

Choose L2TP (Layer 2 Tunneling Protocol) if your ISP uses a L2TP connection. Your ISP will provide you with a username and

password. This option is typically used for DSL services.