51

D-Link DIR-825 User Manual

Section 3 - Configuration

Storage

This page will allow you to access files from a USB external hard drive or thumb drive that is plugged into the router from your

local network or from the Internet using either a web browser or an app for your smartphone or tablet. You can create users

to be allowed to access these files.

Check to enable sharing files on your USB storage device

that is plugged in your router.

Check to enable HTTP access to your router’s storage. You

will have to type HTTP in the URL.

Enter a port (8181 is default). You will have to enter this port

in the URL when connecting to the shared files. For example:

(

http://192±168±0±1:8181

).

Check to enable HTTPS (secure) access to your router’s

storage. You will have to type HTTPS in the URL.

Enter a port (4433 is default). You will have to enter this port

in the URL when connecting to the shared files. For example:

(

https://192±168±0±1:8181

).

To create a new user, enter a user name.

Enter a password for this account.

Re-enter the password. Click

Add/Edit

to create the user.

Displays the accounts. The Admin and Guest accounts are

built-in to the router.

Displays the USB device plugged into the router.

Enable Web File

Access:

Enable HTTP

Storage Remote

Access:

Remote Access

Port:

Enable HTTPS

Storage Remote

Access:

Remote HTTPS

Port:

User Name:

Password:

Verify Password:

User List:

Number of

Devices:

52

D-Link DIR-825 User Manual

Section 3 - Configuration

IPv6

On this page, the user can configure the IPv6 Connection type. There are two ways to set up the IPv6 Internet connection. You

can use the Web-based IPv6 Internet Connection Setup Wizard, or you can manually configure the connection.

For the beginner user that has not configured a router before, click on

the

IPv6.Internet.Connection.Setup.Wizard.

button and the router will

guide you through a few simple steps to get your network up and running.

For the advanced user that has configured a router before, click on the

Manual.IPv6.Internet.Connection.Setup

button to input all the settings

manually.

To configure the IPv6 local settings, click on the

IPv6.Local.Connectivity.

Setup

button.

53

D-Link DIR-825 User Manual

Section 3 - Configuration

IPv6 Internet Connection Setup Wizard

On this page, the user can configure the IPv6 Connection type using the IPv6 Internet Connection Setup Wizard.

Click the

IPv6.Internet.Connection.Setup.Wizard

button and the router will guide

you through a few simple steps to get your network up and running.

Click

Next

to continue to the next page. Click

Cancel

to discard the changes made

and return to the main page.

The router will try to detect whether its possible to obtain the IPv6 Internet

connection type automatically. If this succeeds then the user will be guided through

the input of the appropriate parameters for the connection type found.

54

D-Link DIR-825 User Manual

Section 3 - Configuration

However, if the automatic detection fails, the user will be prompt to either

Try.

again.

or to click on the

Guide.me.through.the.IPv6.settings

button to initiate the

manual continual of the wizard.

There are several connection types to choose from. If you are unsure of your

connection method, please contact your IPv6 Internet Service Provider.

Note:

If using the PPPoE option, you will need to ensure that any PPPoE client

software on your computers has been removed or disabled. The 3 options available

on this page are

.IPv6.over.PPPoE,.Static.IPv6.address.and.Route

, and

Tunneling.

Connection

.

Choose the required IPv6 Internet Connection type and click on the

Next

button

to continue. Click on the

Prev

button to return to the previous page. Click on the

Cancel

button to discard all the changes made and return to the main page.

Click on the

Next

button to continue. Click on the

Prev

button to return to the previous page.

Click on the

Cancel

button to discard all the changes made and return to the main page.

55

D-Link DIR-825 User Manual

Section 3 - Configuration

IPv6.over.PPPoE

After selecting the IPv6 over PPPoE option, the user will be able to configure the

IPv6 Internet connection that requires a username and password to get online.

Most DSL modems use this type of connection.

The following parameters will be available for configuration:

PPPoE.Session:

Select the PPPoE Session value used here. This

option will state that this connection shares it’s

information with the already configured IPv6

PPPoE connection, or the user can create a new

PPPoE connection here.

User.Name:

Enter the PPPoE username used here. If you do not

know your user name, please contact your ISP.

Password:

Enter the PPPoE password used here. If you do not

know your password, please contact your ISP.

Verify.Password:

Re-enter the PPPoE password used here.

Service.Name:

Enter the service name for this connection here.

This option is optional.