Page 56 / 158
Scroll up to view Page 51 - 55
51
D-Link DIR-825 User Manual
Section 3 - Configuration
Storage
This page will allow you to access files from a USB external hard drive or thumb drive that is plugged into the router from your
local network or from the Internet using either a web browser or an app for your smartphone or tablet. You can create users
to be allowed to access these files.
Check to enable sharing files on your USB storage device
that is plugged in your router.
Check to enable HTTP access to your router’s storage. You
will have to type HTTP in the URL.
Enter a port (8181 is default). You will have to enter this port
in the URL when connecting to the shared files. For example:
(
http://192±168±0±1:8181
).
Check to enable HTTPS (secure) access to your router’s
storage. You will have to type HTTPS in the URL.
Enter a port (4433 is default). You will have to enter this port
in the URL when connecting to the shared files. For example:
(
https://192±168±0±1:8181
).
To create a new user, enter a user name.
Enter a password for this account.
Re-enter the password. Click
Add/Edit
to create the user.
Displays the accounts. The Admin and Guest accounts are
built-in to the router.
Displays the USB device plugged into the router.
Enable Web File
Access:
Enable HTTP
Storage Remote
Access:
Remote Access
Port:
Enable HTTPS
Storage Remote
Access:
Remote HTTPS
Port:
User Name:
Password:
Verify Password:
User List:
Number of
Devices:
Page 57 / 158
52
D-Link DIR-825 User Manual
Section 3 - Configuration
IPv6
On this page, the user can configure the IPv6 Connection type. There are two ways to set up the IPv6 Internet connection. You
can use the Web-based IPv6 Internet Connection Setup Wizard, or you can manually configure the connection.
For the beginner user that has not configured a router before, click on
the
IPv6.Internet.Connection.Setup.Wizard.
button and the router will
guide you through a few simple steps to get your network up and running.
For the advanced user that has configured a router before, click on the
Manual.IPv6.Internet.Connection.Setup
button to input all the settings
manually.
To configure the IPv6 local settings, click on the
IPv6.Local.Connectivity.
Setup
button.
Page 58 / 158
53
D-Link DIR-825 User Manual
Section 3 - Configuration
IPv6 Internet Connection Setup Wizard
On this page, the user can configure the IPv6 Connection type using the IPv6 Internet Connection Setup Wizard.
Click the
IPv6.Internet.Connection.Setup.Wizard
button and the router will guide
you through a few simple steps to get your network up and running.
Click
Next
to continue to the next page. Click
Cancel
to discard the changes made
and return to the main page.
The router will try to detect whether its possible to obtain the IPv6 Internet
connection type automatically. If this succeeds then the user will be guided through
the input of the appropriate parameters for the connection type found.
Page 59 / 158
54
D-Link DIR-825 User Manual
Section 3 - Configuration
However, if the automatic detection fails, the user will be prompt to either
Try.
again.
or to click on the
Guide.me.through.the.IPv6.settings
button to initiate the
manual continual of the wizard.
There are several connection types to choose from. If you are unsure of your
connection method, please contact your IPv6 Internet Service Provider.
Note:
If using the PPPoE option, you will need to ensure that any PPPoE client
software on your computers has been removed or disabled. The 3 options available
on this page are
.IPv6.over.PPPoE,.Static.IPv6.address.and.Route
, and
Tunneling.
Connection
.
Choose the required IPv6 Internet Connection type and click on the
Next
button
to continue. Click on the
Prev
button to return to the previous page. Click on the
Cancel
button to discard all the changes made and return to the main page.
Click on the
Next
button to continue. Click on the
Prev
button to return to the previous page.
Click on the
Cancel
button to discard all the changes made and return to the main page.
Page 60 / 158
55
D-Link DIR-825 User Manual
Section 3 - Configuration
IPv6.over.PPPoE
After selecting the IPv6 over PPPoE option, the user will be able to configure the
IPv6 Internet connection that requires a username and password to get online.
Most DSL modems use this type of connection.
The following parameters will be available for configuration:
PPPoE.Session:
Select the PPPoE Session value used here. This
option will state that this connection shares it’s
information with the already configured IPv6
PPPoE connection, or the user can create a new
PPPoE connection here.
User.Name:
Enter the PPPoE username used here. If you do not
know your user name, please contact your ISP.
Password:
Enter the PPPoE password used here. If you do not
know your password, please contact your ISP.
Verify.Password:
Re-enter the PPPoE password used here.
Service.Name:
Enter the service name for this connection here.
This option is optional.
19216811.live