Page 71 / 136
Scroll up to view Page 66 - 70
66
D-Link DIR-815 User Manual
Section 3 - Configuration
IPv6
Static IPv6 (Stateless)
To configure the Router to use a Static IPv6 Stateless connection, configure the parameters in the
LAN Address Autoconfiguration
Settings
section as described below:
Check to enable the Autoconfiguration feature.
Select the
Stateless
option from the drop-down menu.
Enter the Router Advertisement Lifetime (in minutes).
Enable
Autoconfiguration:
Autoconfiguration
Type:
Router
Advertisement
Lifetime:
Click the
Save Settings
button to save any changes made.
Page 72 / 136
67
D-Link DIR-815 User Manual
Section 3 - Configuration
IPv6
Static IPv6 (Stateful)
To configure the Router to use a Static IPv6 Stateful connection, configure the parameters in the
LAN Address Autoconfiguration
Settings
section as described below:
Check to enable the Autoconfiguration feature.
Select the
Stateful(DHCPv6)
option from the drop-down
menu.
Enter the start IPv6 Address for the DHCPv6 range for your
local computers.
Enter the end IPv6 Address for the DHCPv6 range for your
local computers.
Enter the IPv6 Address Lifetime (in minutes).
Enable
Autoconfiguration:
Autoconfiguration
Type:
IPv6 Address Range
Start:
IPv6 Address Range
End:
IPv6 Address
Lifetime:
Click the
Save Settings
button to save any changes made.
Page 73 / 136
68
D-Link DIR-815 User Manual
Section 3 - Configuration
IPv6
DHCPv6 (Stateful)
Select
Static IPv6
from the
My IPv6 Connection is
drop-down menu if your Router will use a static IPv6 address to connect
to the Internet.
Enter the address settings supplied by your Internet
provider (ISP).
Enter the LAN (local) IPv6 address for the router.
Displays the Router’s LAN Link-Local Address.
Use this section to configure the IPv6 autoconfiguration
settings.
WAN IPv6 Address
Settings:
LAN IPv6 Address:
LAN IPv6
Link-Local Address:
LAN Address
Autoconfiguration
Settings:
Click the
Save Settings
button to save any changes made.
Page 74 / 136
69
D-Link DIR-815 User Manual
Section 3 - Configuration
IPv6
DHCPv6 (Stateful)- Stateless Autoconfiguration
To configure the Router to use a Static IPv6 Stateless connection, configure the parameters in the
LAN Address Autoconfiguration
Settings
section as described below:
Check to enable the Autoconfiguration feature.
Select the
Stateless
option from the drop-down menu.
Enter the Router Advertisement Lifetime (in minutes).
Enable
Autoconfiguration:
Autoconfiguration
Type:
Router
Advertisement
Lifetime:
Click the
Save Settings
button to save any changes made.
Page 75 / 136
70
D-Link DIR-815 User Manual
Section 3 - Configuration
IPv6
DHCPv6 (Stateful)- Stateful Autoconfiguration
To configure the Router to use a Static IPv6 Stateful connection, configure the parameters in the
LAN Address Autoconfiguration
Settings
section as described below:
Check to enable the Autoconfiguration feature.
Select the
Stateful(DHCPv6)
option from the drop-down
menu.
Enter the start IPv6 Address for the DHCPv6 range for your
local computers.
Enter the end IPv6 Address for the DHCPv6 range for your
local computers.
Enter the IPv6 Address Lifetime (in minutes).
Enable
Autoconfiguration:
Autoconfiguration
Type:
IPv6 Address Range
Start:
IPv6 Address Range
End:
IPv6 Address
Lifetime:
Click the
Save Settings
button to save any changes made.
19216811.live