11

D-Link DIR-660 User Manual

Section ± - Installation

The DIR-660 includes a Quick Router Setup Wizard CD. Follow the simple steps below to run the Setup Wizard to

guide you quickly through the installation process.

Insert the

Quick Router Setup Wizard CD

in the CD-ROM drive.

The step-by-step instructions that follow are shown

in Windows

®

XP. The steps and screens are similar for the other Windows operating systems.

If the CD Autorun function does not automatically start on your computer, go to

Start

>

Run

. In the run box type

“

D:\DIR660.exe

” (where

D:

represents the drive letter of your CD-ROM drive).

When the autorun screen appears, click the orange

Install

Router

button.

Getting Started

Note:

It is reccomended to write down the SSID and Security Key, followed by the login password on the provided CD

holder.

Downloaded from

www.Manualslib.com

manuals search engine

1±

D-Link DIR-660 User Manual

Section ² - Configuration

Configuration

This section will show you how to configure your new D-Link wireless router using the web-based configuration

utility.

Web-based Configuration Utility

To access the configuration utility, open a web-browser

such as Internet Explorer and enter the IP address of

the router (192.168.0.1).

Select

Admin

from the drop-down menu and then enter

your password. Leave the password blank by default.

If you get a

Page Cannot be Displayed

error, please

refer to the

Troubleshooting

section for assistance.

Downloaded from

www.Manualslib.com

manuals search engine

1²

D-Link DIR-660 User Manual

Section ² - Configuration

Setup Wizard

You may click

Setup Wizard

to quickly configure your router.

If you want to enter your settings without running the wizard, click

Manual Configuration

and skip to page 17.

Click

Launch Internet Connection Setup Wizard

to begin.

If you want to configure your wireless settings, click

Launch Wireless

Security Setup Wizard

and skip to page 65.

Click

Next

to continue.

Downloaded from

www.Manualslib.com

manuals search engine

1³

D-Link DIR-660 User Manual

Section ² - Configuration

Create a new password and then click

Next

to continue.

Select your time zone from the drop-down menu and then click

Next

to continue.

Select the type of Internet connection you use and then click

Next

to continue.

Downloaded from

www.Manualslib.com

manuals search engine

1´

D-Link DIR-660 User Manual

Section ² - Configuration

If you selected Dynamic, you may need to enter the MAC address of the

computer that was last connected directly to your modem. If you are currently

using that computer, click

Clone Your PC’s MAC Address

and then click

Next

to continue.

The Host Name is optional but may be required by some ISPs. The default

host name is the device name of the Router and may be changed.

If you selected PPPoE, enter your PPPoE username and password. Click

Next

to continue.

Select

Static

if your ISP assigned you the IP address, subnet mask, gateway,

and DNS server addresses.

Note:

Make sure to remove your PPPoE software from your computer. The

software is no longer needed and will not work through a router.

If you selected PPTP, enter your PPTP username and password. Click

Next

to continue.

Downloaded from

www.Manualslib.com

manuals search engine