Page 96 / 126
Scroll up to view Page 91 - 95
91
D-Link DIR-657 User Manual
Section 4 - Security
3. Double-click the DIR-657 router.
4. Input the WPS PIN number (displayed in the
Advanced.>.Wi-Fi.Protected.
Setup.
section in the Router’s Web UI) and click
Next
.
DIR-657
Page 97 / 126
92
D-Link DIR-657 User Manual
Section 4 - Security
5. Type a name for your wireless network.
6. To configure advanced settings, click the
icon.
Click
Next
to continue.
Page 98 / 126
93
D-Link DIR-657 User Manual
Section 4 - Security
7. The following window will appear while the Router is being configured.
Wait for the configuration to complete.
8. After configuration is complete, a window will appear that your wireless
network has been set up successfully.
Make a note of the security key as you may need to provide this security key
when adding an older wireless device to the network in the future.
Click
Close
to complete WPS setup.
Page 99 / 126
94
D-Link DIR-657 User Manual
Section 4 - Security
Connect to a Wireless Network
Using Windows® 7
It is recommended to enable wireless security (WPA/WPA2) on your wireless router or access point before configuring your wireless adapter. If you
are joining an existing network, you will need to know the security key or passphrase being used.
1.
Click on the wireless icon in your system tray (lower-right corner).
2.
The utility will display any available wireless networks in your area.
Page 100 / 126
95
D-Link DIR-657 User Manual
Section 4 - Security
3.
Highlight the wireless network (SSID) you would like to connect to and click
the Connect button.
If you get a good signal but cannot access the Internet, check your TCP/IP
settings for your wireless adapter. Refer to the Networking Basics section in
this manual for more information.
4.
The following window appears while your computer tries to connect to the
router.
19216811.live