88
D-Link DIR-657 User Manual
Section 4 - Security
It is recommended to enable encryption on your wireless router before your wireless network adapters. Please establish wireless connectivity before
enabling encryption. Your wireless signal may degrade when enabling encryption due to the added overhead.
1.
.
Log into the web-based configuration by opening a web browser and entering the IP address of the router (192.168.0.1). Click on
.Setup.
and
then click
.Wireless.Settings
on the left side.
2.
Next to
Security Mode
, select
WPA-Enterprise
.
3.
Next to
WPA Mode
, select
Auto
,
WPA2.Only
, or
.WPA.Only
. Use
Auto
if you
have wireless clients using both WPA and WPA2.
4.
Next to
Group Key Update Interval
, enter the amount of time before the group
key used for broadcast and multicast data is changed (3600 is default).
5.
Next to
Authentication Timeout
, enter the amount of time before a client is
required to re-authenticate (60 minutes is default).
6.
Next to
RADIUS Server IP Address
enter the IP Address of your RADIUS server.
7.
Next to
RADIUS Server Port
, enter the port you are using with your RADIUS
server. 1812 is the default port.
8.
Next to
RADIUS Server Shared Secret
, enter the security key.
9.
If the
MAC Address Authentication
box is selected then the user will need
to connect from the same computer whenever logging into the wireless
network.
Configure WPA-Enterprise (RADIUS)
19216811.live