D-Link DIR-655v2 Router Manual PDF (Setup & Configuration Guide)

Page 56 / 134 Scroll up to view Page 51 - 55

52

D-Link DIR-655 User Manual

Section 3 - Conﬁguration

6 to 4

Select

6 to 4

from the drop-down menu.

Enter the IPv6 settings supplied by your Internet provider (ISP).

Enter the primary and secondary DNS server addresses.

Enter the LAN (local) IPv6 address for the router.

Displays the Router’s LAN Link-Local Address.

Check to enable the Autoconﬁguration feature.

Select

Stateful (DHCPv6)

,

SLAAC + RDNSS

or

SLAAC + Stateless

DHCPv6

.

Enter the start IPv6 Address for the DHCPv6 range for your local

computers.

Enter the end IPv6 Address for the DHCPv6 range for your local

computers.

Enter the IPv6 Address Lifetime (in minutes).

My IPv6 Connection:

6 to 4 Settings:

Primary/Secondary

DNS Address:

LAN IPv6 Address:

LAN Link-Local

Address:

Enable

Autoconﬁguration:

Autoconﬁguration

Type:

IPv6 Address Range

Start:

IPv6 Address Range

End:

IPv6 Address

Lifetime:

Page 57 / 134

53

D-Link DIR-655 User Manual

Section 3 - Conﬁguration

6rd

Select

6rd

from the drop-down menu.

Enter the address settings supplied by your Internet provider

(ISP).

Enter the LAN (local) IPv6 address for the router.

Displays the Router’s LAN Link-Local Address.

Check to enable the Autoconﬁguration feature.

Select

Stateful (DHCPv6), SLAAC+RDNSS or SLAAC + Stateless

DHCPv6.

Enter the Router Advertisement Lifetime (in minutes).

My IPv6 Connection:

6RD Settings:

LAN IPv6 Address:

LAN Link-Local Address:

Enable

Autoconﬁguration:

Autoconﬁguration Type:

Router Advertisement

Lifetime:

Page 58 / 134

54

D-Link DIR-655 User Manual

Section 3 - Conﬁguration

Select

Link-Local Only

from the drop-down

menu.

Displays the IPv6 address of the router.

My IPv6 Connection:

LAN IPv6 Address

Settings:

Link-Local Connectivity

Page 59 / 134

55

D-Link DIR-655 User Manual

Section 3 - Conﬁguration

The DIR-655 can be conﬁgured as a virtual server so that remote users accessing Web or FTP services via the public IP address can be automatically

redirected to local servers in the LAN (Local Area Network).

The DIR-655 ﬁrewall feature ﬁlters out unrecognized packets to protect your LAN network so all computers networked with the DIR-655 are invisible

to the outside world. If you wish, you can make some of the LAN computers accessible from the Internet by enabling Virtual Server. Depending on

the requested service, the DIR-655 redirects the external service request to the appropriate server within the LAN network.

The DIR-655 is also capable of port-redirection meaning incoming traﬃc to a particular port may be redirected to a diﬀerent port on the server

computer.

Each virtual service that is created will be listed at the bottom of the screen in the Virtual Servers List. There are pre-deﬁned virtual services already

in the table. You may use them by enabling them and assigning the server IP to use that particular virtual service.

For a list of ports for common applications, please visit

http://support.dlink.com/faq/view.asp?prod_id=1191

.

Virtual Server

Advanced

Page 60 / 134

56

D-Link DIR-655 User Manual

Section 3 - Conﬁguration

This will allow you to open a single port. If you would like to open a range of ports, refer to the next page.

Enter a name for the rule or select an application from the

drop-down menu. Select an application and click

<<

to

populate the ﬁelds.

Enter the IP address of the computer on your local

network that you want to allow the incoming

service to. If your computer is receiving an IP address

automatically from the router (DHCP), you computer

will be listed in the “Computer Name” drop-down

menu. Select your computer and click

<<

.

Enter the port that you want to open next to Private

Port and Public Port. The private and public ports are

usually the same. The public port is the port seen from

the Internet side, and the private port is the port being

used by the application on the computer within your

local network.

Select

TCP

,

UDP

, or

Both

from the drop-down menu.

Select

Allow All

(most common) or a created Inbound

ﬁlter. You may create your own inbound ﬁlters in the

Advanced > Inbound Filter

page.

The schedule of time when the Virtual Server Rule

will be enabled. The schedule may be set to Always,

which will allow the particular service to always be

enabled. You can create your own times in the

Tools

>

Schedules

section.

Name:

IP Address:

Private Port/

Public Port:

Protocol Type:

Inbound Filter:

Schedule:

Rate

Popular D-Link Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share