Page 51 / 134
Scroll up to view Page 46 - 50
47
D-Link DIR-655 User Manual
Section 3 - Configuration
Static IPv6
Select
Static IPv6
from the drop-down menu.
Enter the address settings supplied by your Internet provider
(ISP).
Enter the LAN (local) IPv6 address for the router.
Displays the Router’s LAN Link-Local Address.
Check to enable the Autoconfiguration feature.
Select
Stateful (DHCPv6)
,
SLAAC + RDNSS
or
SLAAC +
Stateless DHCPv6
.
Enter the start IPv6 Address for the DHCPv6 range for your
local computers.
Enter the end IPv6 Address for the DHCPv6 range for your
local computers.
Enter the IPv6 Address Lifetime (in minutes).
My IPv6 Connection:
WAN IPv6 Address
Settings:
LAN IPv6 Address:
LAN Link-Local Address:
Enable
Autoconfiguration:
Autoconfiguration Type:
IPv6 Address Range
Start:
IPv6 Address Range
End:
IPv6 Address Lifetime:
Page 52 / 134
48
D-Link DIR-655 User Manual
Section 3 - Configuration
Autoconfiguration
Select
Autoconfiguration (Stateless/DHCPv6)
from the
drop-down menu.
Select either
Obtain DNS server address automatically
or
Use the following DNS Address
.
Enter the primary and secondary DNS server addresses.
Enter the LAN (local) IPv6 address for the router.
Displays the Router’s LAN Link-Local Address.
Check to enable the Autoconfiguration feature.
Select
Stateful (DHCPv6)
,
SLAAC + RDNSS
or
SLAAC +
Stateless DHCPv6
.
Enter the IPv6 Address Lifetime (in minutes).
My IPv6 Connection:
IPv6 DNS Settings:
Primary/Secondary DNS
Address:
LAN IPv6 Address:
LAN Link-Local Address:
Enable
Autoconfiguration:
Autoconfiguration Type:
Router Advertisement
Lifetime:
Page 53 / 134
49
D-Link DIR-655 User Manual
Section 3 - Configuration
PPPoE
Select
PPPoE
from the drop-down menu.
Enter the PPPoE account settings supplied by your Internet
provider (ISP).
Select
Static
if your ISP assigned you the IP address, subnet mask,
gateway, and DNS server addresses. In most cases, select
Dynamic
.
Enter the IP address (Static PPPoE only).
Enter your PPPoE user name.
Enter your PPPoE password and then retype the password in the
next box.
Enter the ISP Service Name (optional).
Select either
Always-on
,
On-Demand
, or
Manual
.
Enter a maximum idle time during which the Internet connection
is maintained during inactivity. To disable this feature, enable
Auto-reconnect.
Maximum Transmission Unit - you may need to change the MTU for
optimal performance with your specific ISP. 1492 is the default MTU.
Select either
Obtain DNS server address automatically
or
Use
the following DNS Address
.
Enter the primary and secondary DNS server addresses.
Enter the LAN (local) IPv6 address for the router.
Displays the Router’s LAN Link-Local Address.
Check to enable the Autoconfiguration feature.
My IPv6 Connection:
PPPoE:
Address Mode:
IP Address:
User Name:
Password:
Service Name:
Reconnection Mode:
Maximum Idle Time:
MTU:
IPv6 DNS Settings:
Primary/Secondary DNS
Address:
LAN IPv6 Address:
LAN Link-Local Address:
Enable Autoconfiguration:
Page 54 / 134
50
D-Link DIR-655 User Manual
Section 3 - Configuration
Autoconfiguration Type:
IPv6 Advertisement
Lifetime:
Select
Stateful (DHCPv6)
,
SLAAC + RDNSS
or
SLAAC + Stateless DHCPv6
.
Enter the IPv6 Address Lifetime (in minutes).
Page 55 / 134
51
D-Link DIR-655 User Manual
Section 3 - Configuration
IPv6 in IPv4 Tunneling
Select
IPv6 in IPv4 Tunnel
from the drop-down menu.
Enter the settings supplied by your Internet provider (ISP).
Enter the LAN (local) IPv6 address for the router.
Displays the Router’s LAN Link-Local Address.
Check to enable the Autoconfiguration feature.
Select
Stateful (DHCPv6)
,
SLAAC + RDNSS
or
SLAAC + Stateless
DHCPv6
.
Enter the start IPv6 Address for the DHCPv6 range for your local
computers.
Enter the end IPv6 Address for the DHCPv6 range for your local
computers.
Enter the Router Advertisement Lifetime (in minutes).
My IPv6
Connection:
IPv6 in IPv4 Tunnel
Settings:
LAN IPv6 Address:
LAN Link-Local
Address:
Enable
Autoconfiguration:
Autoconfiguration
Type:
IPv6 Address
Range Start:
IPv6 Address
Range End:
Pv6 Address
Lifetime:
19216811.live