Page 91 / 134
Scroll up to view Page 86 - 90
87
D-Link DIR-655 User Manual
Section 3 - Configuration
Stats
The screen below displays the Traffic Statistics. Here you can view the amount of packets that pass through the DIR-655 on both the Internet and the LAN
ports. The traffic counter will reset if the device is rebooted.
Active Sessions
Page 92 / 134
88
D-Link DIR-655 User Manual
Section 3 - Configuration
Routing
The wireless client table displays a list of current connected wireless clients. This table also displays the connection time and MAC address of the
connected wireless clients.
Wireless
Page 93 / 134
89
D-Link DIR-655 User Manual
Section 3 - Configuration
IPV6
IPV6 Routing
Page 94 / 134
90
D-Link DIR-655 User Manual
Section 3 - Configuration
Support
Page 95 / 134
91
D-Link DIR-655 User Manual
Section 4 - Connecting to a Wireless Network
WPS Button
Step 2
-
Within 2 minutes, press the WPS button on your wireless client (or launch the software utility and start the WPS process).
The easiest and most secure way to connect your wireless devices to the router is WPS (Wi-Fi Protected Setup). Most wireless devices such as wireless
adapters, media players, Blu-ray DVD players, wireless printers and cameras will have a WPS button (or a software utility with WPS) that you can
press to connect to the DIR-655 router. Please refer to your user manual for the wireless device you want to connect to make sure you understand
how to enable WPS. Once you know, follow the steps below:
Step 1
-
Press the WPS button on the DIR-655 for about 1 second. The
WPS button will start to blink.
Step 3
-
Allow up to 1 minute to configure. Once the WPS light stops blinking, you will be connected and your wireless connection will be secure
with WPA2.
Connect to a Wireless Network
19216811.live