Page 81 / 134
Scroll up to view Page 76 - 80
77
D-Link DIR-655 User Manual
Section 3 - Configuration
Time Settings
Select the Time Zone from the drop-down menu.
To select Daylight Saving time manually, select
enabled or disabled, and enter a start date and an
end date for daylight saving time.
NTP is short for Network Time Protocol. NTP
synchronizes computer clock times in a network
of computers. Check this box to use a NTP server.
This will only connect to a server on the Internet,
not a local server.
Enter the NTP server or select one from the drop-
down menu.
To manually input the time, enter the values in
these fields for the Year, Month, Day, Hour, Minute,
and Second and then click
Set Time
. You can also
click
Copy Your Computer’s Time Settings
.
Time Zone:
Daylight
Saving:
Enable NTP
Server:
NTP Server
Used:
Manual:
The Time Configuration option allows you to configure, update, and maintain the correct time on the internal system clock. From this section you can
set the time zone that you are in and set the Time Server. Daylight Saving can also be configured to automatically adjust the time when needed.
Page 82 / 134
78
D-Link DIR-655 User Manual
Section 3 - Configuration
SysLog
The Broadband Router keeps a running log of events and activities occurring on the Router. You may send these logs to a SysLog server on your
network.
Enable Logging
to SysLog Server:
SysLog Server IP
Address:
Check this box to send the router logs to a SysLog
Server.
The address of the SysLog server that will be
used to send the logs. You may also select your
computer from the drop-down menu (only if
receiving an IP address from the router via DHCP).
Page 83 / 134
79
D-Link DIR-655 User Manual
Section 3 - Configuration
Email Settings
The Email feature can be used to send the system log files, router alert messages, and firmware update notification to your email address.
Enable Email
Notification:
From Email
Address:
To Email Address:
SMTP Server
Address:
Enable
Authentication:
Account Name:
Password:
On Log Full:
On Schedule:
Schedule:
When this option is enabled, router activity logs are
e-mailed to a designated email address.
This email address will appear as the sender when
you receive a log file or firmware upgrade notification
via email.
Enter the email address where you want the email
sent.
Enter the SMTP server address for sending email.
If your SMTP server requires authentication, select
this option.
Check this box if your SMTP server requires
authentication.
Enter your account for sending email.
Enter the password associated with the account.
Re-type the password associated with the account.
When this option is selected, logs will be sent via
email when the log is full.
Selecting this option will send the logs via email according to schedule.
This option is enabled when On Schedule is selected. You can select a schedule from the list of defined schedules. To create a schedule,
go to
Tools > Schedules
.
Page 84 / 134
80
D-Link DIR-655 User Manual
Section 3 - Configuration
Use this option to save the current router
configuration settings to a file on the hard disk of
the computer you are using. First, click the
Save
button. You will then see a file dialog, where you
can select a location and file name for the settings.
Use this option to load previously saved router
configuration settings. First, use the Browse control
to find a previously save file of configuration
settings. Then, click the
Load
button to transfer
those settings to the router.
This option will restore all configuration settings
back to the settings that were in effect at the time
the router was shipped from the factory. Any settings
that have not been saved will be lost, including any
rules that you have created. If you want to save the
current router configuration settings, use the Save
button above.
Click to reboot the router.
Save Settings
to Local Hard
Drive:
Load Settings
from Local
Hard Drive:
Restore to
Factory Default
Settings:
Reboot Device:
System Settings
Page 85 / 134
81
D-Link DIR-655 User Manual
Section 3 - Configuration
Click on
Check Online Now for Latest Firmware
Version
to find out if there is an updated firmware;
if so, download the new firmware to your hard drive.
After you have downloaded the new firmware,
click
Browse
to locate the firmware update on your
hard drive. Click
Upload
to complete the firmware
upgrade.
Check
Automatically Check Online for Latest
Firmware Version
to have the router check
automatically to see if there is a new firmware
upgrade.
Check
Email Notification of Newer Firmware
Version
to have the router send an email when there
is a new firmware available.
Firmware
Upgrade:
Browse:
Notifications
Options:
Update Firmware
You can upgrade the firmware of the Router here. Make sure the firmware you want to use is on the local hard drive of the computer. Click on
Browse
to locate the firmware file to be used for the update. Please check the D-Link support site for firmware updates at
http://support.dlink.com. You can
download firmware upgrades to your hard drive from the D-Link support site.
19216811.live