D-Link DIR-652 Router Manual PDF (Setup & Configuration Guide)

Page 56 / 122 Scroll up to view Page 51 - 55

51

D-Link DIR-652 User Manual

Section 3 - Conﬁguration

This will allow you to open a single port. If you would like to open a range of ports, refer to the next page.

Enter a name for the rule or select an application from the drop-down

menu. Select an application and click

<<

to populate the ﬁelds.

Enter the IP address of the computer on your local network that

you want to allow the incoming service to. If your computer is

receiving an IP address automatically from the router (DHCP),

you computer will be listed in the “Computer Name” drop-down

menu. Select your computer and click

<<

.

Enter the port that you want to open next to Private Port and

Public Port. The private and public ports are usually the same. The

public port is the port seen from the Internet side, and the private

port is the port being used by the application on the computer

within your local network.

Select

TCP

,

UDP

, or

Both.

from the drop-down menu.

Select

Allow.All

(most common) or a created Inbound ﬁlter. You

may create your own inbound ﬁlters in the

Advanced.>.Inbound.

Filter

page.

The schedule of time when the Virtual Server Rule will be enabled.

The schedule may be set to Always, which will allow the particular

service to always be enabled. You can create your own times in

the

Tools

>

Schedules

section.

Name:

IP Address:

Private Port/

Public Port:

Protocol Type:

Inbound Filter:

Schedule:

Page 57 / 122

52

D-Link DIR-652 User Manual

Section 3 - Conﬁguration

This will allow you to open a single port or a range of ports.

Port Forwarding

Enter a name for the rule or select an application from the drop-down

menu. Select an application and click

<<

to populate the ﬁelds.

Enter the IP address of the computer on your local network that

you want to allow the incoming service to. If your computer is

receiving an IP address automatically from the router (DHCP),

you computer will be listed in the “Computer Name” drop-down

menu. Select your computer and click

<<

.

Enter the TCP and/or UDP port or ports that you want to open.

You can enter a single port or a range of ports. Separate ports

with a common.

Example: 24,1009,3000-4000

Select

Allow.All

(most common) or a created Inbound ﬁlter. You

may create your own inbound ﬁlters in the

Advanced.>.Inbound.

Filter

page.

The schedule of time when the Virtual Server Rule will be enabled.

The schedule may be set to Always, which will allow the particular

service to always be enabled. You can create your own times in

the

Tools

>

Schedules

section.

Name:

IP Address:

TCP/UDP:

Inbound Filter:

Schedule:

Page 58 / 122

53

D-Link DIR-652 User Manual

Section 3 - Conﬁguration

Enter a name for the rule. You may select a pre-deﬁned

application from the drop-down menu and click

<<

.

This is the port used to trigger the application. It can be either

a single port or a range of ports.

Select the protocol of the trigger port (TCP, UDP, or Both).

This is the port number on the Internet side that will be used

to access the application. You may deﬁne a single port or a

range of ports. You can use a comma to add multiple ports

or port ranges.

Select the protocol of the ﬁrewall port (TCP, UDP, or Both).

The schedule of time when the Application Rule will be

enabled. The schedule may be set to Always, which will allow

the particular service to always be enabled. You can create

your own times in the

Tools

>

Schedules

section.

Name:

Trigger:

Traﬃc Type:

Firewall:

Traﬃc Type:

Schedule:

Application Rules

Some applications require multiple connections, such as Internet gaming, video conferencing, Internet telephony and others. These applications

have diﬃculties working through NAT (Network Address Translation). Special Applications makes some of these applications work with the

DIR-652. If you need to run applications that require multiple connections, specify the port normally associated with an application in the “Trigger

Port” ﬁeld, select the protocol type as TCP or UDP, then enter the ﬁrewall (public) ports associated with the trigger port to open them for inbound

traﬃc.

The DIR-652 provides some predeﬁned applications in the table on the bottom of the web page. Select the application you want to use and enable it.

Page 59 / 122

54

D-Link DIR-652 User Manual

Section 3 - Conﬁguration

QoS Engine

The QoS Engine option helps improve your network gaming performance by prioritizing applications. By default the QoS Engine settings are

disabled and application priority is not classiﬁed automatically.

This option is disabled by default. Enable this option for

better performance and experience with online games and

other interactive applications, such as VoIP.

This option is enabled by default when the QoS Engine

option is enabled. This option will allow your router to

automatically determine the uplink speed of your Internet

connection.

This displays the detected uplink speed.

The speed at which data can be transferred from the router

to your ISP. This is determined by your ISP.

This option is enabled by default. This will allow your

router to automatically determine the network priority of

running programs.

This option is enabled by default so that your router will

automatically determine which programs should have

network priority. For best performance, use the Automatic

Classiﬁcation option to automatically set the priority for

your applications.

This option should be enabled when you have a slow

Internet uplink. It helps to reduce the impact that large low

priority network packets can have on more urgent ones.

Enable Traﬃc

Shaping:

Automatic Uplink

Speed:

Measured Uplink

Speed:

Manual Uplink

Speed:

Enabled

QoS Engine:

Automatic

Classiﬁcation:

Dynamic

Fragmentation:

Page 60 / 122

55

D-Link DIR-652 User Manual

Section 3 - Conﬁguration

A QoS Engine Rule identiﬁes a speciﬁc message ﬂow and

assigns a priority to that ﬂow. For most applications, automatic

classiﬁcation will be adequate, and speciﬁc QoS Engine Rules

will not be required.

The QoS Engine supports overlaps between rules, where more

than one rule can match for a speciﬁc message ﬂow. If more

than one rule is found to match the rule with the highest

priority will be used.

Create a name for the rule that is meaningful to you.

The priority of the message ﬂow is entered here -- 1 receives

the highest priority (most urgent) and 255 receives the lowest

priority (least urgent).

The protocol used by the messages.

The rule applies to a ﬂow of messages whose LAN-side IP

address falls within the range set here.

The rule applies to a ﬂow of messages whose LAN-side port

number is within the range set here.

The rule applies to a ﬂow of messages whose WAN-side IP

address falls within the range set here.

The rule applies to a ﬂow of messages whose WAN-side port

number is within the range set here.

QoS Engine Rules:

Name:

Priority:

Protocol:

Local IP Range:

Local Port Range:

Remote IP Range:

Remote Port Range:

Rate

Popular D-Link Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share