D-Link DIR-636L Router Manual PDF (Setup & Configuration Guide)

Page 71 / 139 Scroll up to view Page 66 - 70

67

D-Link DIR-636L User Manual

Section 3 - Conﬁguration

6 to 4 Tunneling

Select

6.to.4

from the drop-down menu.

Enter the IPv6 settings supplied by your Internet provider (ISP).

Enter the primary and secondary DNS server addresses.

Enter the LAN (local) IPv6 address for the router.

Displays the Router’s LAN Link-Local Address.

Check to enable the Autoconﬁguration feature.

Select

Stateful.(DHCPv6)

,

SLAAC.+.RDNSS

or

SLAAC.+.Stateless.

DHCPv6

.

Enter the start IPv6 Address for the DHCPv6 range for your local

computers.

Enter the end IPv6 Address for the DHCPv6 range for your local

computers.

Enter the IPv6 Address Lifetime (in minutes).

My IPv6 Connection:

6 to 4 Settings:

Primary/Secondary

DNS Address:

LAN IPv6 Address:

LAN Link-Local

Address:

Enable

Autoconﬁguration:

Autoconﬁguration

Type:

IPv6 Address Range

Start:

IPv6 Address Range

End:

IPv6 Address

Lifetime:

Page 72 / 139

68

D-Link DIR-636L User Manual

Section 3 - Conﬁguration

6rd

Select

6rd

from the drop-down menu.

Enter the address settings supplied by your Internet provider

(ISP).

Enter the LAN (local) IPv6 address for the router.

Displays the Router’s LAN Link-Local Address.

Check to enable the Autoconﬁguration feature.

Select

Stateful (DHCPv6), SLAAC+RDNSS or SLAAC + Stateless

DHCPv6.

Enter the Router Advertisement Lifetime (in minutes).

My IPv6 Connection:

6RD Settings:

LAN IPv6 Address:

LAN Link-Local Address:

Enable

Autoconﬁguration:

Autoconﬁguration Type:

Router Advertisement

Lifetime:

Page 73 / 139

69

D-Link DIR-636L User Manual

Section 3 - Conﬁguration

Select

Link-Local.Only

from the drop-down

menu.

Displays the IPv6 address of the router.

My IPv6 Connection:

LAN IPv6 Address

Settings:

Link-Local Connectivity

Page 74 / 139

70

D-Link DIR-636L User Manual

Section 3 - Conﬁguration

mydlink Settings

Display the status whether your device is registered with a

mydlink account or not.

Click to go to the mydlink website to register or edit your

settings.

mydlink Service:

Register mydlink

Settings:

Page 75 / 139

71

D-Link DIR-636L User Manual

Section 3 - Conﬁguration

This will allow you to open a single port. If you would like to open a range of ports, refer to the next page.

Enter a name for the rule or select an application from

the drop-down menu. Select an application and click

<<

to populate the ﬁelds.

Enter the IP address of the computer on your local

network that you want to allow the incoming

service to. If your computer is receiving an IP address

automatically from the router (DHCP), you computer

will be listed in the “Computer Name” drop-down

menu. Select your computer and click

<<

.

Enter the port that you want to open next to Private

Port and Public Port. The private and public ports are

usually the same. The public port is the port seen from

the Internet side, and the private port is the port being

used by the application on the computer within your

local network.

Select

TCP

,

UDP

, or

Both.

from the drop-down menu.

The schedule of time when the Virtual Server Rule

will be enabled. The schedule may be set to Always,

which will allow the particular service to always be

enabled. You can create your own times in the

Tools

>

Schedules

section.

Select

Allow.All

(most common) or a created Inbound

ﬁlter. You may create your own inbound ﬁlters in the

Advanced.>.Inbound.Filter

page.

Name:

IP Address:

Private Port/

Public Port:

Protocol Type:

Schedule:

Inbound Filter:

Virtual Server

Advanced

Rate

Popular D-Link Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share