Page 46 / 139
Scroll up to view Page 41 - 45
42
D-Link DIR-636L User Manual
Section 4 - Security
Wireless Security Setup Wizard
To run the security wizard, click on Setup at the top and then click
Wireless.Network.Setup.Wizard
.
Type your desired wireless network name (SSID).
Automatically:.
Select this option to automatically generate
the router’s network key and click
Next
.
Manually:
Select this option to manually enter your network
key and click
Next
.
Page 47 / 139
43
D-Link DIR-636L User Manual
Section 4 - Security
If you selected
Automatically
, the summary window will display
your settings. Write down the security key and enter this on your
wireless clients. Click
Save
to save your settings.
If you selected
Manually
, the following screen will appear. Create
a passphrase for your security password. Click
Next
to continue.
Page 48 / 139
44
D-Link DIR-636L User Manual
Section 4 - Security
From the
Setup
>
Wireless.Settings
screen, click
Add.Wireless.
Device.with.WPS
.
Add Wireless Device with WPS Wizard
If you select
Manual
, a settings summary screen will appear. Write
down the security key and enter this on your wireless clients. Click
OK
to finish.
Select
Auto
to add a wireless client using WPS (Wi-Fi Protected
Setup) and then click
Next
. Skip to the next page.
Page 49 / 139
45
D-Link DIR-636L User Manual
Section 4 - Security
PIN:
Select this option to use PIN method. In order to use this
method you must know the wireless client’s 8 digit PIN and click
Connect
.
PBC:.
Select this option to use PBC (Push Button) method to add a
wireless client. Click
Connect
.
Once you click
.Connect
, you will have a 120 second time limit
to apply the settings to your wireless client(s) and successfully
establish a connection.
Page 50 / 139
46
D-Link DIR-636L User Manual
Section 4 - Security
WPA/WPA2-Personal (PSK)
It is recommended to enable encryption on your wireless router before your wireless network adapters. Please establish
wireless connectivity before enabling encryption. Your wireless signal may degrade when enabling encryption due to the
added overhead.
1. Log into the web-based configuration by opening a web browser and
entering the IP address of the router (192.168.0.1). Click on
.Setup.
and
then click
.Wireless.Settings
on the left side.
2. Next to
Security Mode
, select
WPA-Personal
.
3. Next to
WPA Mode
, select
Auto
,
WPA2.Only
, or
.WPA.Only
. Use
Auto
if you have wireless clients using both WPA and WPA2.
4. Next to
Cypher Type
, select
TKIP.and.AES
,
TKIP
, or
AES
.
5. Next to
Group Key Update Interval
, enter the amount of time before
the group key used for broadcast and multicast data is changed (3600
is default).
6. Next to
Pre-Shared Key
, enter a key (passphrase). The key is entered as
a pass-phrase in ASCII format at both ends of the wireless connection.
The pass-phrase must be between 8-63 characters.
7. Click
Save.Settings
to save your settings. If you are configuring the
router with a wireless adapter, you will lose connectivity until you
enable WPA-PSK on your adapter and enter the same passphrase as
you did on the router.
19216811.live