D-Link DIR-635 Router Manual PDF (Setup & Configuration Guide)

Page 26 / 93 Scroll up to view Page 21 - 25

±6

D-Link DIR-635 User Manual

Section 3 - Conﬁguration

Enter the IP address of the login server.

Enter your BigPond username.

Enter your BigPond password and then retype

the password in the next box.

The DNS server information will be supplied

by your ISP (Internet Service Provider.)

Maximum Transmission Unit - you may need to

change the MTU for optimal performance with

your speciﬁc ISP. 1492 is the default MTU.

The default MAC Address is set to the

Internet’s physical interface MAC address on

the Broadband Router. It is not recommended

that you change the default MAC address

unless required by your ISP.

You can use the

Clone Your PC’s MAC Address

button to

replace the Internet port’s MAC address with

the MAC address of your Ethernet card.

BigPond Server:

BigPond Username:

BigPond Password:

DNS Servers:

MTU:

MAC Address:

Internet Setup

Big Pond

Page 27 / 93

±³

D-Link DIR-635 User Manual

Section 3 - Conﬁguration

Check the box to enable the wireless function. If you do not

want to use wireless, uncheck the box to disable all the wireless

functions.

Service Set Identiﬁer (SSID) is the name of your wireless network.

Create a name using up to 32 characters. The SSID is case-

sensitive.

The

Auto Channel Scan

setting can be selected to allow

the DIR-635 to choose the channel with the least amount of

interference.

Indicates the channel setting for the DIR-635. By default the

channel is set to 6. The Channel can be changed to ﬁt the channel

setting for an existing wireless network or to customize the

wireless network. If you enable

Auto Channel Scan

, this option

will be greyed out.

Select one of the following:

802.11g Only

- Select if all of your wireless clients are 802.11g.

Mixed 802.11g and 802.11b

- Select if you are using both 802.11b and 802.11g wireless clients.

802.11b Only

- Select if all of your wireless clients are 802.11b.

802.11n Only

- Select only if all of your wireless clients are 802.11n.

Mixed 802.11n, 802.11b, and 802.11g

- Select if you are using a mix of 802.11n, 11g, and 11b wireless clients.

Select the Channel Width:

40MHz

- Select if you are using all 802.11n devices for maximum performance.

Auto 20/40

- This is the default setting. Select if you are using both 802.11n and non-802.11n wireless devices.

20MHz

- Select if you are not using any 802.11n wireless clients.

Select the transmit rate. It is strongly suggested to select

Best (Auto)

for best performance.

Enable Wireless:

Enable Auto

Channel Scan:

Wireless Settings

Wireless Network

Name:

Wireless Channel:

802.11 Mode:

Channel Width:

Transmission Rate:

Page 28 / 93

±´

D-Link DIR-635 User Manual

Section 3 - Conﬁguration

Select

Invisible

if you do not want the SSID of your wireless network to be broadcasted by the DIR-635. If Invisible is selected,

the SSID of the DIR-635 will not be seen by Site Survey utilities so your wireless clients will have to know the SSID of your

DIR-635 in order to connect to it.

Refer to page 60 for more information regarding wireless security.

Visibility Status:

Wireless Security:

Page 29 / 93

±µ

D-Link DIR-635 User Manual

Section 3 - Conﬁguration

This section will allow you to change the local network settings of the router and to conﬁgure the DHCP settings.

Network Settings

Enter the IP address of the router. The default IP

address is 192.168.0.1.

If you change the IP address, once you click Apply,

you will need to enter the new IP address in your

browser to get back into the conﬁguration utility.

Enter the Subnet Mask. The default subnet mask is

255.255.255.0.

Enter the Domain name (Optional).

Uncheck the box to transfer the DNS server

information from your ISP to your computers. If

checked, your computers will use the router for a

DNS server.

IP Address:

Subnet Mask:

Local Domain:

Enable DNS Relay:

Page 30 / 93

30

D-Link DIR-635 User Manual

Section 3 - Conﬁguration

Check this box to enable the DHCP server on

your router. Uncheck to disable this function.

Enter the starting and ending IP addresses for

the DHCP server’s IP assignment.

Note:

If you statically (manually) assign IP

addresses to your computers or devices, make

sure the IP addresses are outside of this range

or you may have an IP conﬂict.

The length of time for the IP address lease.

Enter the Lease time in minutes.

Refer to the next page for the DHCP Reservation

function.

Enable DHCP

Server:

DHCP IP Address

Range:

Lease Time:

Add DHCP

Reservation:

DHCP Server Settings

DHCP stands for Dynamic Host Control Protocol. The DIR-635 has a built-in DHCP server. The DHCP Server will

automatically assign an IP address to the computers on the LAN/private network. Be sure to set your computers to be

DHCP clients by setting their TCP/IP settings to “Obtain an IP Address Automatically.” When you turn your computers

on, they will automatically load the proper TCP/IP settings provided by the DIR-635. The DHCP Server will automatically

allocate an unused IP address from the IP address pool to the requesting computer. You must specify the starting and

ending address of the IP address pool.

Rate

Popular D-Link Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share