D-Link DIR-625 Router Manual PDF (Setup & Configuration Guide)

Page 46 / 94 Scroll up to view Page 41 - 45

³6

D-Link DIR-6±5 User Manual

Section ² - Conﬁguration

Time Settings

Select the Time Zone from the drop-down

menu.

To select Daylight Saving time manually, select

enabled or disabled, and enter a start date and

an end date for daylight saving time.

NTP is short for Network Time Protocol. NTP

synchronizes computer clock times in a network

of computers. Check this box to use a NTP

server. This will only connect to a server on the

Internet, not a local server.

Enter the NTP server or select one from the

drop-down menu.

To manually input the time, enter the values

in these ﬁelds for the Year, Month, Day, Hour,

Minute, and Second and then click

Set Time

.

You can also click

Copy Your Computer’s Time

Settings

.

Time Zone:

Daylight Saving:

Enable NTP

Server:

NTP Server Used:

Manual:

The Time Conﬁguration option allows you to conﬁgure, update, and maintain the correct time on the internal system

clock. From this section you can set the time zone that you are in and set the Time Server. Daylight Saving can also

be conﬁgured to automatically adjust the time when needed.

Downloaded from

www.Manualslib.com

manuals search engine

Page 47 / 94

³´

D-Link DIR-6±5 User Manual

Section ² - Conﬁguration

SysLog

The Broadband Router keeps a running log of events and activities occurring on the Router. You may send these logs

to a SysLog server on your network.

Enable Logging to

SysLog Server:

SysLog Server IP

Address:

Check this box to send the router logs to a

SysLog Server.

The address of the SysLog server that will be

used to send the logs. You may also select

your computer from the drop-down menu (only

if receiving an IP address from the router via

DHCP).

Downloaded from

www.Manualslib.com

manuals search engine

Page 48 / 94

³µ

D-Link DIR-6±5 User Manual

Section ² - Conﬁguration

Email Settings

The Email feature can be used to send the system log ﬁles, router alert messages, and ﬁrmware update notiﬁcation

to your email address.

Enable Email

Notiﬁcation:

From Email

Address:

To Email Address:

SMTP Server

Address:

Enable

Authentication:

Account Name:

Password:

On Log Full:

On Schedule:

Schedule:

When this option is enabled, router activity logs

are e-mailed to a designated email address.

This email address will appear as the sender

when you receive a log ﬁle or ﬁrmware upgrade

notiﬁcation via email.

Enter the email address where you want the

email sent.

Enter the SMTP server address for sending email.

If your SMTP server requires authentication,

select this option.

Check this box if your SMTP server requires

authentication.

Enter your account for sending email.

Enter the password associated with the account.

Re-type the password associated with the

account.

When this option is selected, logs will be sent

via email when the log is full.

Selecting this option will send the logs via email

according to schedule.

This option is enabled when On Schedule is selected. You can select a schedule from the list of deﬁned schedules. To create

a schedule, go to

Tools > Schedules

.

Downloaded from

www.Manualslib.com

manuals search engine

Page 49 / 94

³¶

D-Link DIR-6±5 User Manual

Section ² - Conﬁguration

Use this option to save the current router

conﬁguration settings to a ﬁle on the hard disk

of the computer you are using. First, click the

Save button. You will then see a ﬁle dialog,

where you can select a location and ﬁle name

for the settings.

Use this option to load previously saved

router configuration settings. First, use the

Browse control to ﬁnd a previously save ﬁle

of conﬁguration settings. Then, click the Load

button to transfer those settings to the router.

This option will restore all conﬁguration settings

back to the settings that were in effect at the

time the router was shipped from the factory.

Any settings that have not been saved will be

lost, including any rules that you have created. If

you want to save the current router conﬁguration

settings, use the Save button above.

Click to reboot the router.

Save Settings to

Local Hard Drive:

Load Settings

from Local Hard

Drive:

Restore to Factory

Default Settings:

Reboot Device:

System Settings

Downloaded from

www.Manualslib.com

manuals search engine

Page 50 / 94

50

D-Link DIR-6±5 User Manual

Section ² - Conﬁguration

Click on

Check Online Now for Latest Firmware

Version

to ﬁnd out if there is an updated ﬁrmware;

if so, download the new ﬁrmware to your hard

drive.

After you have downloaded the new ﬁrmware,

click

Browse

to locate the ﬁrmware update on

your hard drive.

Click

Upload

to complete the

ﬁrmware upgrade.

Check

Automatically Check Online for Latest

Firmware Version

to have the router check

automatically to see if there is a new ﬁrmware

upgrade.

Check

Email Notiﬁcation of Newer Firmware

Version

to have the router send an email when

there is a new ﬁrmware available.

Firmware

Upgrade:

Browse:

Notiﬁcations

Options:

Update Firmware

You can upgrade the ﬁrmware of the Router here. Make sure the ﬁrmware you want to use is on the local hard drive of

the computer. Click on

Browse

to locate the ﬁrmware ﬁle to be used for the update. Please check the D-Link support

site for ﬁrmware updates at http://support.dlink.com. You can download ﬁrmware upgrades to your hard drive from the

D-Link support site.

Downloaded from

www.Manualslib.com

manuals search engine

Rate

Popular D-Link Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share