1. Home
    2. /
  2. Manuals
    3. /
  3. D-Link
    4. /
  4. DIR-620 Etisalat
    5. /
  5. 30
Page 146 / 159 Scroll up to view Page 141 - 145
DIR-620
Multifunction Wireless Router Supporting WiMAX,
3G GSM/CDMA with Built-in Switch
User Manual
Configuring via Web-based Interface
Figure 124. The
Control / URL filter
page. The
URL addresses
tab.
On the opened page, specify the needed parameters.
Figure 125. The page for adding an address for the URL filter.
Enter a URL address in the
URL address
field and click the
Save
button.
To remove an address from the list of URL addresses, select the relevant address in the table on the
URL addresses
tab and click the
Delete
button.
To disable the URL filter, deselect the
Enable/Disable URL filter
checkbox on the
Configuration
tab, then click the
Change
button.
Page
146
of 159
Page 147 / 159
DIR-620
Multifunction Wireless Router Supporting WiMAX,
3G GSM/CDMA with Built-in Switch
User Manual
Configuring via Web-based Interface
System
In this menu you can do the following:
•
change the password used to access the router's settings
•
save the current settings to the non-volatile memory
•
create a backup of the router's configuration
•
restore the router's configuration from a previously saved file
•
restore the factory default settings
•
view the system log
•
update the firmware of the router
•
configure automatic synchronization of the system time
•
check availability of a host on the Internet through the web-based interface of the router
•
allow or forbid access to the router via TELNET.
Administrator Password
On the
System / Administrator password
page, you can change the password for the
administrator account used to access the web-based interface of the router and to access the device
settings via TELNET.
!
For security reasons, it is strongly recommended to change the administrator password
upon initial configuration of the router.
Figure 126. The page for modifying the administrator password.
Enter the new password in the
Password
and
Confirmation
fields and click the
Save
button.
Page
147
of 159
Page 148 / 159
DIR-620
Multifunction Wireless Router Supporting WiMAX,
3G GSM/CDMA with Built-in Switch
User Manual
Configuring via Web-based Interface
Configuration
On the
System / Configuration
page, you can save the changed settings to the non-volatile
memory, restore the factory defaults, backup the current configuration, or restore the router's
configuration from a previously created file.
Figure 127. The
System / Configuration
page.
The following buttons are available on the page:
Control
Description
Save
Click the button to save settings to the non-volatile memory. Please,
save settings every time you change the router's parameters.
Otherwise the changes will be lost upon hardware reboot of the
router.
Factory
Click the button to restore the factory default settings. Also you can
restore the factory defaults via the hardware RESET button (see the
Saving and Restoring Settings
section, page 31).
Backup
Click the button and follow the dialog box appeared to save the
configuration (all settings of the router) to your PC.
Restore
Click the button to upload a previously saved configuration (all
settings of the router) from a file on your PC. Click the
Choose/Browse
7
button to select a previously saved
configuration file located on your PC.
Actions of the
Save
,
Factory
, and
Backup
buttons also can be performed via the top-page menu
displayed when the mouse pointer is over the
System
caption.
7
The name of the button depends upon the web browser that you use.
Page
148
of 159
Page 149 / 159
DIR-620
Multifunction Wireless Router Supporting WiMAX,
3G GSM/CDMA with Built-in Switch
User Manual
Configuring via Web-based Interface
System Log
On the
System / System log
page, you can set the system log options and configure sending the
system log to a remote host.
Figure 128. The
System / System log
page. The
Configuration
tab.
To enable logging of the system events, select the
Logging
checkbox on the
Configuration
tab.
Then specify the needed parameters.
Control
Description
Logging type
Select a type of logging from the drop-down list.
•
Local
: the system log is stored in the router's memory (and
displayed on the
Log
tab). When this value is selected, the
Server address type
,
Server
, and
Port
fields are not
displayed.
•
Remote
: the system log is sent to the remote host specified in
the
Server
field.
•
Local and remote
: the system log is stored in the router's
memory (and displayed on the
Log
tab) and sent to the
remote host specified in the
Server
field.
Logging level
Select a type of messages and alerts/notifications to be logged.
Server address type
From the drop-down list, select the
IP
value to specify an IP address
of a host from the local or global network, or the
URL
value to
specify a URL address of a remote server.
Server
The IP or URL address of the host from the local or global network,
to which the system log will be sent.
Port
A port of the host specified in the
Server
field. By default, the value
514
is specified.
After specifying the needed parameters, click the
Change
button.
Page
149
of 159
Page 150 / 159
DIR-620
Multifunction Wireless Router Supporting WiMAX,
3G GSM/CDMA with Built-in Switch
User Manual
Configuring via Web-based Interface
To disable logging of the system events, deselect the
Logging
checkbox and click the
Change
button.
On the
Log
tab, the events specified in the
Logging level
list are displayed.
Figure 129. The
System / System log
page. The
Log
tab.
To view the latest system events, click the
Refresh
button.
To save the system log to your PC, click the
Export
button and follow the dialog box appeared.
Page
150
of 159

Rate

4 / 5 based on 1 vote.

Popular D-Link Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top