D-Link DIR-615v3 Router Manual PDF (Setup & Configuration Guide)

Page 21 / 83 Scroll up to view Page 16 - 20

±1

D-Link DIR-615 User Manual

Section ² - Conﬁguration

Enter the IP address of the login server.

Enter your BigPond username.

Enter your BigPond password and then retype

the password in the next box.

Select the type of authentication server being

used.

The default MAC Address is set to the

Internet’s physical interface MAC address on

the Broadband Router. It is not recommended

that you change the default MAC address

unless required by your ISP.

You can use the

Clone Your PC’s MAC Address

button to

replace the Internet port’s MAC address with

the MAC address of your Ethernet card.

BigPond Server:

BigPond Username:

BigPond Password:

Auth Server:

MAC Address:

Internet Setup

Big Pond

Page 22 / 83

±±

D-Link DIR-615 User Manual

Section ² - Conﬁguration

Check the box to enable the wireless function. If you do not

want to use wireless, uncheck the box to disable all the wireless

functions.

Service Set Identiﬁer (SSID) is the name of your wireless network.

Create a name using up to 32 characters. The SSID is case-

sensitive.

Indicates the channel setting for the DIR-615. The Channel can be

changed to ﬁt the channel setting for an existing wireless network

or to customize the wireless network. If you enable

Auto Channel

Scan

, this option will be greyed out.

The

Auto Channel Scan

setting can be selected to allow the

DIR-615 to choose the channel with the least amount of interference.

This feature is enabled by default.

Select one of the following:

802.11g only

- Select if all of your wireless clients are 802.11g.

Mixed 802.11b/g

- Select if you are using both 802.11b and 802.11g wireless clients.

802.11n Only

- Select only if all of your wireless clients are 802.11n.

Mixed 802.11b/g/n

- Select if you are using a mix of 802.11b, 11g, and 11n wireless clients.

Select Invisible if you do not want the SSID of your wireless network to be broadcasted by the router. If Invisible is selected

the SSID will not be seen by site survey utilities so your wireless clients must have the SSID manually entered to connect to

the router.

Refer to page 47 for more information regarding wireless security.

Enable Wireless:

Enable Auto

Channel Scan:

Wireless Settings

Wireless Network

Name:

Wireless Channel:

802.11 Mode:

Visibility Status:

Wireless Security:

Page 23 / 83

±²

D-Link DIR-615 User Manual

Section ² - Conﬁguration

This section will allow you to change the local network settings of the router and to conﬁgure the DHCP settings.

Network Settings

Enter the IP address of the router. The default IP

address is 192.168.0.1.

If you change the IP address, once you click Apply,

you will need to enter the new IP address in your

browser to get back into the conﬁguration utility.

Enter the Subnet Mask. The default subnet mask is

255.255.255.0.

Enter the Domain name (Optional).

Uncheck the box to transfer the DNS server

information from your ISP to your computers. If

checked, your computers will use the router for a

DNS server.

IP Address:

Subnet Mask:

Local Domain:

Enable DNS Relay:

Page 24 / 83

±³

D-Link DIR-615 User Manual

Section ² - Conﬁguration

Check this box to enable the DHCP server on

your router. Uncheck to disable this function.

Enter the starting and ending IP addresses for

the DHCP server’s IP assignment.

Note:

If you statically (manually) assign IP

addresses to your computers or devices, make

sure the IP addresses are outside of this range

or you may have an IP conﬂict.

The length of time for the IP address lease.

Enter the Lease time in minutes.

Refer to the next page for the DHCP Reservation

function.

Enable DHCP

Server:

DHCP IP Address

Range:

Lease Time:

Add DHCP

Reservation:

DHCP Server Settings

DHCP stands for Dynamic Host Control Protocol. The DIR-615 has a built-in DHCP server. The DHCP Server will

automatically assign an IP address to the computers on the LAN/private network. Be sure to set your computers to be

DHCP clients by setting their TCP/IP settings to “Obtain an IP Address Automatically.” When you turn your computers

on, they will automatically load the proper TCP/IP settings provided by the DIR-615. The DHCP Server will automatically

allocate an unused IP address from the IP address pool to the requesting computer. You must specify the starting and

ending address of the IP address pool.

Page 25 / 83

±5

D-Link DIR-615 User Manual

Section ² - Conﬁguration

DHCP Reservation

If you want a computer or device to always have the same IP address assigned, you can create a DHCP reservation.

The router will assign the IP address only to that computer or device.

Note:

This IP address must be within the DHCP IP Address Range.

Check this box to enable the reservation.

Enter the computer name or select from the

drop-down menu and click

<<

.

Enter the IP address you want to assign to the

computer or device. This IP Address must be

within the DHCP IP Address Range.

Enter the MAC address of the computer or

device.

If you want to assign an IP address to the

computer you are currently on, click this button

to populate the ﬁelds.

Click

Save

to save your entry. You must click

Save Settings

at the top to activate your

reservations.

Enable:

Computer Name:

IP Address:

MAC Address:

Copy Your PC’s

MAC Address:

Save:

Rate

Popular D-Link Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share