6

D-Link DIR-615 User Manual

Section 1 - Product Overview

Hardware Overview

Connections

Reset

Pressing the Reset button restores the router to

its original factory default settings.

Power Receptor

Receptor for the supplied power

adapter.

LAN Ports (1-4)

Connect Ethernet devices such as

computers, switches, and hubs.

Internet Port

The auto MDI/MDIX Internet port is

the connection for the Ethernet cable

to the cable or DSL modem.

´

D-Link DIR-615 User Manual

Section 1 - Product Overview

Hardware Overview

LEDs

WLAN LED

A solid light indicates that the wireless

segment is ready. This LED blinks

during wireless data transmission.

Status LED

A blinking light indicates that the

DIR-615 is ready.

Internet LED

A solid light indicates connection on

the Internet port. This LED blinks

during data transmission.

Power LED

A solid light indicates a

proper connection to the

power supply.

Local Network LEDs

A solid light indicates a connection to an

Ethernet-enabled computer on ports 1-4.

This LED blinks during

data transmission.

µ

D-Link DIR-615 User Manual

Section ± - Installation

Before you Begin

Installation

This section will walk you through the installation process. Placement of the router is very important. Do not place the

router in an enclosed area such as a closet, cabinet, or in the attic or garage.

Please configure the router with the computer that was last connected directly to your modem. Also, you can only use

the Ethernet port on your modem. If you were using the USB connection before using the router, then you must turn off

your modem, disconnect the USB cable and connect an Ethernet cable to the Internet port on the router, and then turn

the modem back on. In some cases, you may need to call your ISP to change connection types (USB to Ethernet).

If you have DSL and are connecting via PPPoE, make sure you disable or uninstall any PPPoE software such as

WinPoet, Broadjump, or Enternet 300 from your computer or you will not be able to connect to the Internet.

¶

D-Link DIR-615 User Manual

Section ± - Installation

Wireless Installation Considerations

The D-Link wireless router lets you access your network using a wireless connection from virtually anywhere within

the operating range of your wireless network. Keep in mind, however, that the number, thickness and location of walls,

ceilings, or other objects that the wireless signals must pass through, may limit the range. Typical ranges vary depending

on the types of materials and background RF (radio frequency) noise in your home or business. The key to maximizing

wireless range is to follow these basic guidelines:

1

. Keep the number of walls and ceilings between the D-Link router and other network devices to a minimum

- each wall or ceiling can reduce your adapter’s range from 3-90 feet (1-30 meters.) Position your devices

so that the number of walls or ceilings is minimized.

2

. Be aware of the direct line between network devices. A wall that is 1.5 feet thick (.5 meters), at a

45-degree angle appears to be almost 3 feet (1 meter) thick. At a 2-degree angle it looks over 42 feet

(14 meters) thick! Position devices so that the signal will travel straight through a wall or ceiling (instead

of at an angle) for better reception.

3

. Building Materials make a difference. A solid metal door or aluminum studs may have a negative effect on

range. Try to position access points, wireless routers, and computers so that the signal passes through

drywall or open doorways. Materials and objects such as glass, steel, metal, walls with insulation, water

(fish tanks), mirrors, file cabinets, brick, and concrete will degrade your wireless signal.

4

. Keep your product away (at least 3-6 feet or 1-2 meters) from electrical devices or appliances that

generate RF noise.

5

. If you are using 2.4GHz cordless phones or X-10 (wireless products such as ceiling fans, lights, and

home security systems), your wireless connection may degrade dramatically or drop completely. Make

sure your 2.4GHz phone base is as far away from your wireless devices as possible. The base transmits

a signal even if the phone in not in use.

10

D-Link DIR-615 User Manual

Section ± - Installation

Getting Started

The DIR-615 includes a Quick Router Setup Wizard CD. Follow the simple steps below to run the Setup Wizard to

guide you quickly through the installation process.

Insert the

Quick Router Setup Wizard CD

in the CD-ROM drive. The step-by-step instructions that follow are shown

in Windows

®

XP. The steps and screens are similar for the other Windows operating systems.

If the CD Autorun function does not automatically start on your computer, click on

Start

>

Run

. In the run box type

“

D:\DIR615.exe

” (where

D:

represents the drive letter of your CD-ROM drive).

When the autorun screen appears, click

Install Router

.

Click

Install Router

Note

: It is reccomended to write down the login password on the provided CD holder.