²6

D-Link DIR-615 User Manual

Section ² - Configuration

Time Settings

Select the Time Zone from the drop-down

menu.

To select Daylight Saving time manually, select

enabled or disabled, and enter a start date and

an end date for daylight saving time.

NTP is short for Network Time Protocol. NTP

synchronizes computer clock times in a network

of computers. Check this box to use a NTP

server. This will only connect to a server on the

Internet, not a local server.

Enter the NTP server or select one from the

drop-down menu.

To manually input the time, enter the values

in these fields for the Year, Month, Day, Hour,

Minute, and Second and then click

Set Time

.

You can also click

Copy Your Computer’s Time

Settings

.

Time Zone:

Daylight Saving:

Enable NTP

Server:

NTP Server Used:

Manual:

The Time Configuration option allows you to configure, update, and maintain the correct time on the internal system

clock. From this section you can set the time zone that you are in and set the Time Server. Daylight Saving can also

be configured to automatically adjust the time when needed.

²´

D-Link DIR-615 User Manual

Section ² - Configuration

Use this option to save the current router

configuration settings to a file on the hard disk

of the computer you are using. First, click the

Save button. You will then see a file dialog,

where you can select a location and file name

for the settings.

Use this option to load previously saved

router configuration settings. First, use the

Browse control to find a previously save file

of configuration settings. Then, click the Load

button to transfer those settings to the router.

This option will restore all configuration settings

back to the settings that were in effect at the

time the router was shipped from the factory.

Any settings that have not been saved will be

lost, including any rules that you have created. If

you want to save the current router configuration

settings, use the Save button above.

Click to reboot the router.

Save Settings to

Local Hard Drive:

Load Settings

from Local Hard

Drive:

Restore to Factory

Default Settings:

Reboot Device:

System Settings

²µ

D-Link DIR-615 User Manual

Section ² - Configuration

After you have downloaded the new firmware,

click

Browse

to locate the firmware update on

your hard drive. Click

Upload

to complete the

firmware upgrade.

Browse:

Update Firmware

You can upgrade the firmware of the Router here. Make sure the firmware you want to use is on the local hard drive of

the computer. Click on

Browse

to locate the firmware file to be used for the update. Please check the D-Link support

site for firmware updates at http://support.dlink.com. You can download firmware upgrades to your hard drive from the

D-Link support site.

²¶

D-Link DIR-615 User Manual

Section ² - Configuration

Dynamic Domain Name System is a method of

keeping a domain name linked to a changing IP

Address. Check the box to enable DDNS.

Choose your DDNS provider from the drop

down menu and click the

<<

button.

Enter the Host Name that you registered with

your DDNS service provider.

Enter the Username for your DDNS account.

Enter the Password for your DDNS account.

DDNS:

Server Address:

Host Name:

Username or Key:

Password or Key:

DDNS

The DDNS feature allows you to host a server (Web, FTP, Game Server, etc…) using a domain name that you have

purchased (www.whateveryournameis.com) with your dynamically assigned IP address. Most broadband Internet

Service Providers assign dynamic (changing) IP addresses. Using a DDNS service provider, your friends can enter in

your domain name to connect to your server no matter what your IP address is.

³0

D-Link DIR-615 User Manual

Section ² - Configuration

The Ping Test is used to send Ping packets to test if a

computer is on the Internet. Enter the IP Address that you

wish to Ping, and click

Ping

.

The results of your ping attempts will be displayed here.

System Check

Ping Test:

Ping Results: