Page 116 / 120 Scroll up to view Page 111 - 115
112
D-Link DIR-608 User Manual
Appendix B - Networking Basics
Statically Assign an IP address
If you are not using a DHCP capable gateway/router, or you need to assign a static IP address, please follow the steps below:
Step 1
Windows® 7 -
Click on
Start
>
Control Panel
>
Network and Internet
>
Network and Sharing Center
.
Windows Vista® -
Click on
Start
>
Control Panel
>
Network and Internet
>
Network and Sharing Center
>
Manage Network Connections.
Windows® XP -
Click on
Start
>
Control Panel
>
Network Connections
.
Windows® 2000 -
From the desktop, right-click
My Network Places
>
Properties
.
Step 2
Right-click on the
Local Area Connection
which represents your network adapter and select
Properties
.
Step 3
Highlight
Internet Protocol (TCP/IP)
and click
Properties
.
Step 4
Click
Use the following IP address
and enter an IP address that is on the same subnet as your network
or the LAN IP address on your router.
Example: If the router´s LAN IP address is 192.168.11.1, make your IP address 192.168.0.X where X is a
number between 2 and 99. Make sure that the number you choose is not in use on the network. Set
the Default Gateway the same as the LAN IP address of your router (I.E. 192.168.11.1).
Set Primary DNS the same as the LAN IP address of your router (192.168.11.1). The Secondary DNS is
not needed or you may enter a DNS server from your ISP.
Step 5
Click
OK
twice to save your settings.
Page 117 / 120
113
D-Link DIR-608 User Manual
Appendix B - Networking Basics
Wireless Security
This section will show you the different levels of security you can use to protect your data from intruders. The DIR-608 offers
the following types of security:
• WPA2 (Wi-Fi Protected Access 2)
• WPA2-PSK (Pre-Shared Key)
• WPA (Wi-Fi Protected Access)
• WPA-PSK (Pre-Shared Key)
What is WPA?
WPA (Wi-Fi Protected Access), is a Wi-Fi standard that was designed to improve the security features of WEP (Wired Equivalent Privacy).
The 2 major improvements over WEP:
• Improved data encryption through the Temporal Key Integrity Protocol (TKIP). TKIP scrambles the keys using a hashing
algorithm and by adding an integrity-checking feature, ensures that the keys haven’t been tampered with. WPA2 is based
on 802.11i and uses Advanced Encryption Standard (AES) instead of TKIP.
• User authentication, which is generally missing in WEP, through the extensible authentication protocol (EAP). WEP
regulates access to a wireless network based on a computer’s hardware-specific MAC address, which is relatively simple
to be sniffed out and stolen. EAP is built on a more secure public-key encryption system to ensure that only authorized
network users can access the network.
WPA-PSK/WPA2-PSK uses a passphrase or key to authenticate your wireless connection. The key is an alpha-numeric password between
8 and 63 characters long. The password can include symbols (!?*&_) and spaces. This key must be the exact same key entered on your
wireless router or access point.
WPA/WPA2 incorporates user authentication through the Extensible Authentication Protocol (EAP). EAP is built on a more secure public
key encryption system to ensure that only authorized network users can access the network.
Page 118 / 120
114
D-Link DIR-608 User Manual
Appendix C - Technical Specifications
Technical Specifications
Hardware Specifications
LAN Interface: Two 10/100 Mbps LAN ports
WAN Interface: One 10/100 Mbps Internet port
Wireless Interface (2.4 GHz): IEEE 802.11n/g/b
Operating Voltage
Input: 100~240 V AC, 50~60 Hz
Output: 12 V DC, 0.5 A
Temperature
Operating: 0 ~ 40
o
C (32 ~ 104
o
F)
Non-Operating: -20 ~ 65
o
C (-20 ~ 149
o
F)
Humidity
Operating: 10% - 90% non-condensing
Storage: 5% - 95% non-condensing
Wireless Frequency Range
IEEE 802.11b: 2400 MHz ~ 2483 MHz
IEEE 802.11g: 2400 MHz ~ 2484 MHz
IEEE 802.11n: 2400 MHz ~ 2484 MHz
Wireless Bandwidth Rate
1
IEEE 802.11b: 11, 5.5, 2, and 1 Mbps
IEEE 802.11g: 6, 9, 12, 18, 24, 36, 48, and 54 Mbps
IEEE 802.11n: 6.5 to 150 Mbps
Antenna Type
One external antenna
Wireless Security
64/128bit WEP, WPA/WPA2-Personal, WPS-PBC
Safey and Emission Certification
FCC
Dimensions & Weight
180.56 x 91.07 x 25.37 mm (7.11 x 3.59 x 1.00 inches)
114 g ( 4.02 oz)
1 Maximum wireless signal rate derived from IEEE Standard 802.11b, 802.11g, and 802.11n specifications. Actual data throughput will vary. Network conditions and environmental factors, including
volume of network traffic, building materials and construction, and network overhead, lower actual data throughput rate. Environmental factors will adversely affect wireless signal range.
2 Frequency range varies depending on country’s regulation.
Page 119 / 120
115
D-Link DIR-608 User Manual
Appendix D - Safety Statements
Caution:
Do not remove the plug and connect it to a power outlet by itself; always attach the plug to the power adaptor first
before connecting it to a power outlet.
FCC Statement:
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of
the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
FCC Caution:
Any changes or modifications not expressly approved by the party responsible for compliance could void the
user’s authority to operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may
not cause harmful interference, and (2) this device must accept any interference received, including interference that may
cause undesired operation.
For product available in the USA/Canada market, only channel 1~11 can be operated. Selection of other channels is not possible.
Safety Statements
Page 120 / 120
116
D-Link DIR-608 User Manual
Appendix D - Safety Statements
IMPORTANT NOTE:
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should
be installed and operated with minimum distance 25 cm between the radiator and your body.

Rate

3.5 / 5 based on 2 votes.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top