Page 81 / 93 Scroll up to view Page 76 - 80
77
D-Link DIR-605L User Manual
Appendix B - Networking Basics
Networking Basics
Check your IP address
After you install your new D-Link adapter, by default, the TCP/IP settings should be set to obtain an IP address from a DHCP
server (i.e. wireless router) automatically. To verify your IP address, please follow the steps below.
Click on
Start
>
Run
. In the run box type
cmd
and click
OK±
(Windows® 7/Vista® users type
cmd
in the
Start.Search
box.)
At the prompt, type
ipconfig
and press
Enter
.
This will display the IP address, subnet mask, and the
default gateway of your adapter.
If the address is 0.0.0.0, check your adapter installation,
security settings, and the settings on your router.
Some firewall software programs may block a DHCP
request on newly installed adapters.
Page 82 / 93
78
D-Link DIR-605L User Manual
Appendix B - Networking Basics
Statically Assign an IP address
If you are not using a DHCP capable gateway/router, or you need to assign a static IP address, please follow the steps below:
Step.1
Windows® 7 -
Click on
Start
>
Control.Panel
>
Network.and.Internet
>
Network.and.Sharing.Center
.
Windows Vista® -
Click on
Start
>
Control.Panel
>
Network.and.Internet
>
Network.and.Sharing.Center
>
Manage.Network
.
.
.
Connections±
Windows® XP -
Click on
Start
>
Control.Panel
>
Network.Connections
.
Windows® 2000 -
From the desktop, right-click
My.Network.Places
>
Properties
.
Step.2
Right-click on the
Local.Area.Connection
which represents your network adapter and select
Properties
.
Step.3
Highlight
Internet.Protocol.(TCP/IP)
and click
Properties
.
Step.4
Click
Use.the.following.IP.address
and enter an IP address that is on the same subnet
as your network or the LAN IP address on your router.
Example: If the router´s LAN IP address is 192.168.0.1, make your IP address 192.168.0.X
where X is a number between 2 and 99. Make sure that the number you choose is not
in use on the network. Set the Default Gateway the same as the LAN IP address of your
router (I.E. 192.168.0.1).
Set Primary DNS the same as the LAN IP address of your router (192.168.0.1). The
Secondary DNS is not needed or you may enter a DNS server from your ISP.
Step.5
Click
OK
twice to save your settings.
Page 83 / 93
79
D-Link DIR-605L User Manual
Appendix C - Technical Specifications
Technical Specifications
Standards
• IEEE 802.11g
• IEEE 802.11b
• IEEE 802.11n
• IEEE 802.3
• IEEE 802.3u
• IEEE 802.3x
Wireless Signal Rates*
• 300Mbps
• 150Mbps
• 54Mbps
• 48Mbps
• 36Mbps
• 24Mbps
• 18Mbps
• 12Mbps
• 11Mbps
• 9Mbps
• 6Mbps
• 5.5Mbps
• 2Mbps
• 1Mbps
Security
• WPA - Wi-Fi Protected Access (TKIP, MIC, IV Expansion,
Shared Key Authentication)
• WPA/WPA2
Modulation Technology
• 802.11 b : DSSS / DBPSK / DQPSK / CCK
• 802.11 g : 16QAM / 64QAM / BPSK / QPSK with OFDM
• 802.11 n : 16QAM / 64QAM / BPSK / QPSK with OFDM
VPN Pass Through/ Multi-Sessions
• PPTP
• IPSec
Device Management
• Web-based Internet Explorer 8 or later, or
other Java-enabled browsers
• DHCP Server and Client
Wireless Frequency Range*
• 2.4GHz to 2.497GHz (802.11b)
• 2.4GHz to 2.4835GHZ (802.11g and 802.11n)
Wireless Operating Range
• Indoors - up to 328 ft. (100 meters)
• Outdoors- up to 1312 ft. (400 meters)
Wireless Transmit Power (AVG Power)
• 11b:17dBm(Max)
• 11g:16dBm(Max)
• 11n:13dBm(Max)
External Antenna Type
• Two fixed external antenna
Advanced Firewall Features
• NAT with VPN Pass-through (Network Address Translation)
• MAC Filtering
• IP Filtering
• URL Filtering
• Scheduling
Operating Temperature
• 32°F to 129 °F ( 0°C to 40°C)
Page 84 / 93
80
D-Link DIR-605L User Manual
Appendix C - Technical Specifications
Humidity
• 95% maximum (non-condensing)
Safety and Emissions
• FCC
• CE
• C-tick
• NCC
• CCC
LEDs
• Power
• Status
• Internet
• WLAN (Wireless Connection)
• LAN (10/100)
Dimensions
• L = 135mm
• W = 99.8mm
• H = 31.5mm
Weight
• 0.246kg
* Maximum wireless signal rate derived from IEEE Standard 802.11b, 802.11g and 802.11n specifications. Actual data throughput will vary. Network conditions
and environmental factors, including volume of network traffic, building materials and construction, and network overhead, lower actual data throughput rate.
Environmental factors will adversely affect wireless signal range.
Page 85 / 93
81
D-Link DIR-605L User Manual
Appendix C - Technical Specifications
Contacting Technical Support
U.S. and Canadian customers can contact D-Link technical support through our web site or by phone.
Before you contact technical support, please have the following ready:
• Model number of the product (e.g. DIR-605L)
• Hardware Revision (located on the label on the bottom of the router (e.g. rev A1))
• Serial Number (s/n number located on the label on the bottom of the router).
You can find software updates and user documentation on the D-Link website as well as frequently asked questions and
answers to technical issues.
For.customers.within.the.United.States:
Phone.Support:
(877) 453-5465
Internet.Support:
For.customers.within.Canada:
Phone.Support:
(800) 361-5265
Internet.Support:

Rate

3.5 / 5 based on 2 votes.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top