Page 56 / 93
Scroll up to view Page 51 - 55
52
D-Link DIR-605L User Manual
Section 3 - Configuration
Help
Click the desired hyperlink to get more information about how to use the Router.
Page 57 / 93
53
D-Link DIR-605L User Manual
Section 4 - Security
Connect a Wireless Client to your Router
WPS Button
Step.2
- Within 2 minutes, press the WPS button on your wireless client (or launch the software utility and start the WPS process).
The easiest and most secure way to connect your wireless devices to the router is WPS (Wi-Fi Protected Setup). Most wireless
devices such as wireless adapters, media players, Blu-ray DVD players, wireless printers and cameras will have a WPS button
(or a software utility with WPS) that you can press to connect to the DIR-605L router. Please refer to your user manual for the
wireless device you want to connect to make sure you understand how to enable WPS. Once you know, follow the steps below:
Step.1
- Press the WPS button on the DIR-605L for a few seconds
until the WPS button starts blinking.
Step.3
- Allow up to 1 minute to configure. Once the WPS light stops blinking, you will be connected and your wireless connection
will be secure with WPA2.
WPS Button
Page 58 / 93
54
D-Link DIR-605L User Manual
Section 4 - Security
Windows® 7
It is recommended to enable wireless security (WPA/WPA2) on your wireless router or access point before configuring your
wireless adapter. If you are joining an existing network, you will need to know the security key or passphrase being used.
1. Click on the wireless icon in your system tray (lower-right corner).
2. The utility will display any available wireless networks in your area.
Wireless Icon
WPA/WPA2
Page 59 / 93
55
D-Link DIR-605L User Manual
Section 4 - Security
3. Highlight the wireless network (SSID) you would like to connect to
and click the
Connect
button.
If you get a good signal but cannot access the Internet, check your
TCP/IP settings for your wireless adapter. Refer to the Networking
Basics section in this manual for more information.
4. The following window appears while your computer tries to
connect to the router.
Page 60 / 93
56
D-Link DIR-605L User Manual
Section 4 - Security
5. Enter the same security key or passphrase that is on your router and
click
Connect
. You can also connect by pushing the WPS button on
the router.
It may take 20-30 seconds to connect to the wireless network. If the
connection fails, please verify that the security settings are correct. The
key or passphrase must be exactly the same as on the wireless router.
19216811.live