D-Link DIR-600L Router Manual PDF (Setup & Configuration Guide)

Page 21 / 93 Scroll up to view Page 16 - 20

17

D-Link DIR-600L User Manual

Section 3 - Conﬁguration

Select

Dynamic

(most common) or

Static

. Select

Static

if your

ISP assigned you the IP address, subnet mask, gateway, and

DNS server addresses.

Enter your PPPoE user name.

Enter your PPPoE password and then retype the password in

the next box.

Enter the ISP Service Name (optional).

Enter the IP address (Static PPPoE only).

The default MAC Address is set to the WAN’s physical interface

MAC address on the Broadband Router.

You can click the

Copy.Your.PC’s.MAC.Address

button to

copy the MAC address of the Ethernet adapter installed in

your computer to the router.

Enter the Primary and Secondary DNS Server Addresses (Static

PPPoE only).

Enter a maximum idle time during which the Internet connection

is maintained during inactivity. To disable this feature, enable

Auto-reconnect.

Maximum Transmission Unit - You may need to change the MTU for optimal performance with your speciﬁc ISP.

1492

is the default MTU.

Select a schedule or click

Add.New

to create a new one. Then select either

Manual

or

Connection.on.demand

.

PPPoE:

User Name:

Password:

Service Name:

IP Address:

MAC Address:

Copy Your PC’s

MAC Address:

DNS Addresses:

Maximum Idle

Time:

MTU:

Connection Mode

Select:

PPPoE

Choose PPPoE (Point to Point Protocol over Ethernet) if your ISP uses a PPPoE connection. Your ISP will provide you with a

username and password. This option is typically used for DSL services. Make sure to remove your PPPoE software from your

computer. The software is no longer needed and will not work through a router.

Page 22 / 93

18

D-Link DIR-600L User Manual

Section 3 - Conﬁguration

Select

Dynamic

(most common) or

Static

. Select

Static

if your ISP

assigned you the IP address, subnet mask, gateway, and DNS server

addresses.

Enter the IP address (Static PPTP only).

Enter the Primary and Secondary DNS Server Addresses (Static PPTP

only).

Enter the Gateway IP Address provided by your ISP.

The DNS server information will be supplied by your ISP (Internet

Service Provider.)

The default MAC Address is set to the WAN’s physical interface MAC

address on the Broadband Router.

You can click the

Copy.Your.PC’s.MAC.Address

button to copy the

MAC address of the Ethernet adapter installed in your computer to

the router.

Enter the Server IP provided by your ISP (optional).

Enter your PPTP account name.

Enter your PPTP password and then retype the password in the

Conﬁrm Password

box.

Enter a maximum idle time during which the Internet connection

is maintained during inactivity. To disable this feature, enable Auto-

reconnect.

Maximum Transmission Unit - You may need to change the MTU for

optimal performance.

Select a schedule or click

Add.New

to create a new one. Then select

either

Manual

or

Connection.on.demand

.

PPTP:

PPTP IP Address:

PPTP Subnet Mask:

PPTP Gateway:

Primary DNS:

MAC Address:

Copy Your PC’s

MAC Address:

PPTP Server IP:

User Name:

Password:

Maximum Idle

Time:

MTU:

Connection Mode

Select:

PPTP

Choose PPTP (Point-to-Point-Tunneling Protocol ) if your ISP uses a PPTP connection. Your ISP will provide you with a username

and password.

Page 23 / 93

19

D-Link DIR-600L User Manual

Section 3 - Conﬁguration

Select

Dynamic

(most common) or

Static

. Select

Static

if your ISP

assigned you the IP address, subnet mask, gateway, and DNS server

addresses.

Enter the IP address (Static L2TP only).

Enter the Primary and Secondary DNS Server Addresses (Static L2TP

only).

Enter the Gateway IP Address provided by your ISP.

The DNS server information will be supplied by your ISP (Internet

Service Provider.)

The default MAC Address is set to the WAN’s physical interface MAC

address on the Broadband Router.

You can click the

Copy.Your.PC’s.MAC.Address

button to copy the

MAC address of the Ethernet adapter installed in your computer to

the router.

Enter the Server IP provided by your ISP (optional).

Enter your L2TP account name.

Enter your L2TP password and then retype the password in the

Conﬁrm Password

box.

Enter a maximum idle time during which the Internet connection

is maintained during inactivity. To disable this feature, enable Auto-

reconnect.

Maximum Transmission Unit - You may need to change the MTU for

optimal performance with your speciﬁc ISP.

Select a schedule or click

Add.New

to create a new one. Then select

either

Manual

or

Connection.on.demand

.

L2TP:

L2TP IP Address:

L2TP Subnet Mask:

L2TP Gateway:

Primary DNS:

MAC Address:

Copy Your PC’s

MAC Address:

Server IP:

User Name:

Password:

Maximum Idle

Time:

MTU:

Connection Mode

Select:

L2TP

Choose L2TP (Layer 2 Tunneling Protocol) if your ISP uses a L2TP connection. Your ISP will provide you with a username and

password. This option is typically used for DSL services.

Page 24 / 93

20

D-Link DIR-600L User Manual

Section 3 - Conﬁguration

Wireless Settings

If you want to conﬁgure the wireless settings on your router

using the wizard, click

Wireless.Connection.Setup.Wizard

and skip to page 23.

If you want to manually conﬁgure the wireless settings on

your router click

Manual.Wireless.Connection.Setup

and

refer to the next page.

Page 25 / 93

21

D-Link DIR-600L User Manual

Section 3 - Conﬁguration

To enable WPS (WCN 2.0), check the Enable box. Click either

Generate.New.PIN

or

Reset.PIN.to.Default

, and then conﬁgure

the Wi-Fi settings below. Please see the Setting Up Wi-Fi

Protection (WCN 2.0 in Windows Vista®) section later in this

manual for detailed conﬁguration information.

Check the box to enable the wireless function. If you do not

want to use wireless, uncheck the box to disable all the wireless

functions.

Service Set Identifier (SSID) is the name of your wireless

network. Create a name using up to 32 characters. The SSID is

case-sensitive.

Check this box to allow the DIR-600L to select the channel with

the least amount of interference automatically.

Indicates the wireless channel for the router. By default the

channel is set to 6. The Channel can be changed to ﬁt the

channel setting to customize your wireless network. If you

enabled Auto Channel Selection, this option will be greyed out.

Use the drop-down menu to select the appropriate Transmission

Rate in Mbits per second. Many users will want to use the default

setting,

Best (automatic)

.

Enable Wi-Fi Multimedia to enjoy basic quality of service

features. WMM prioritizes traffic according to four access

categories: voice, video, best eﬀort, and background.

Check this option if you would not like the SSID of your wireless

network to be broadcasted by the DIR-600L. If this option is

checked, the SSID of the DIR-600L will not be seen by Site Survey

utilities so your wireless clients will have to know the SSID of

your DIR-600L in order to connect to it.

Wi-Fi Protected

Setup:

Enable

Auto Channel:

Wireless Network

Name:

Transmission

Rate:

WMM Enable:

Enable Wireless:

Enable Hidden

Wireless:

Manual Wireless Setup

Wireless Channel:

Rate

Popular D-Link Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share