Page 11 / 93
Scroll up to view Page 6 - 10
7
D-Link DIR-600L User Manual
Section 2 - Installation
1. Unplug the power from your modem.
Manual Setup
For best results, place the router in an open area of your intended work area for better wireless coverage. Please use the
computer that you are currently connecting to the Internet with.
2. Unplug the Ethernet cable from your modem that is connected to your computer. Plug it into the LAN port
labeled 1 on the back of your router. The router is now connected to your computer.
Modem
DIR-600L
Computer
5V
RESET
1A
INTERNET
1
2
LAN
3
4
Page 12 / 93
8
D-Link DIR-600L User Manual
Section 2 - Installation
3. Use the supplied Ethernet cable and plug it into the port labeled INTERNET on the back of the router. Plug the
other end of this cable into the Ethernet port on your modem.
4. Plug the power back into the modem and power it on. Then connect the supplied power adapter into the power
receptor on the back of the router and then plug into a power outlet or surge protector. Verify the power light
is lit.
5. If you are connecting to a Broadband service that uses a dynamic connection (not PPPoE), you may be online
already. Try opening a web browser and enter a web site. If you connect to a web site, you are finished with your
Internet setup. Please skip to page 14 to configure your router and use the manual setup procedure to configure
your network and wireless settings. If you did not connect to the Internet, use the Easy Setup Wizard (refer to the
next page).
DIR-600L
DIR-600L
Modem
Computer
Modem
Computer
5V
RESET
INTERNET
1
2
LAN
3
4
5V
RESET
INTERNET
1
2
LAN
3
4
Page 13 / 93
9
D-Link DIR-600L User Manual
Section 3 - Configuration
Configuration
There are a couple different ways you can configure your router to connect to the Internet and connect to your clients:
•
D-Link.Easy.Setup.Wizard
- This wizard will launch if you log into the router for the first time. See below.
•
Manual.Setup
- Log into the router and manually configure your router (advanced users only). Refer to page 14.
Easy Setup Wizard
To access the configuration utility, open a web-browser such
as Internet Explorer and enter the IP address of the router
(
http://192±168±0±1
) or
http://dlinkrouter
.
You will be directed to the D-Link Easy Setup Wizard
page, which will detect your Internet connection type.
Page 14 / 93
10
D-Link DIR-600L User Manual
Section 3 - Configuration
Follow the on-screen instructions to configure your Internet
settings. If your Internet connection is using
DHCP
, skip to the
next page.
If you are using a
PPPoE
connection, enter your user name and
password. Click
Connect
.
Note:
Make sure to remove your PPPoE software from your
computer. The software is no longer needed and will not work
through a router.
If you selected
PPTP
, enter your PPTP username and password.
Click
Next
to continue.
Page 15 / 93
11
D-Link DIR-600L User Manual
Section 3 - Configuration
If you selected
L2TP
, enter your L2TP username and password. Click
Next
to
continue.
If you selected
Static
, enter your network settings supplied by your Internet
provider. Click
Next
to continue.
Once you are connected, the following screen will appear.
19216811.live