11

D-Link DIR-330 User Manual

Section 3 - Configuration

Configuration

This section will show you how to configure your new D-Link wireless router using the web-based configuration

utility.

Web-based Configuration Utility

To access the configuration utility, open a web-browser such

as Internet Explorer and enter the IP address of the router

(192.168.0.1).

Enter

admin

as the User name field and enter the password in

the Password field. Leave the password blank by default.

If you get a

Page Cannot be Displayed

error, please refer

to the

Troubleshooting

section for assistance.

12

D-Link DIR-330 User Manual

Section 3 - Configuration

Setup Wizard

You may click

Setup Wizard

to quickly configure your router.

If you want to enter your settings without running the wizard, click

Manual Configure

and skip to page 17.

If you want to configure your wireless settings using the

Wireless

Security Setup Wizard

, skip to page 64.

Click

Next

to continue.

Create a new password and then click

Next

to continue.

*PPTP, L2TP, Russian PPPoE, and Russian PPTP Internet configurations referenced in this section do not apply in North America.

13

D-Link DIR-330 User Manual

Section 3 - Configuration

Select your time zone from the drop-down menu and then click

Next

to continue.

Select the type of Internet connection you use and then click

Next

to continue.

If you selected Dynamic, you may need to enter the MAC address of

the computer that was last connected directly to your modem. If you are

currently using that computer, click

Clone Your PC’s MAC Address

and

then click

Next

to continue.

The Host Name is optional but may be required by some ISPs. The default

host name is the device name of the Router and may be changed.

14

D-Link DIR-330 User Manual

Section 3 - Configuration

If you selected PPPoE, enter your PPPoE username and password. Click

Next

to continue.

Select

Static

if your ISP assigned you the IP address, subnet mask,

gateway, and DNS server addresses.

Note:

Make sure to remove your PPPoE software from your computer. The

software is no longer needed and will not work through a router.

If you selected PPTP, enter your PPTP username and password. Click

Next

to continue.

If you selected L2TP, enter your L2TP username and password. Click

Next

to continue.

15

D-Link DIR-330 User Manual

Section 3 - Configuration

If you selected Static, enter your network settings supplied by your Internet

provider. Click

Next

to continue.

If you selected PPPoE, enter your PPPoE username and password. Click

Next

to continue.

Select

Static

if your ISP assigned you the IP address, subnet mask,

gateway, and DNS server addresses.

Note:

Make sure to remove your PPPoE software from your computer. The

software is no longer needed and will not work through a router.