Page 21 / 29
Scroll up to view Page 16 - 20
DIR-300NRU
Quick Installation Guide
11.
For connection of PPTP + Dynamic IP or L2TP + Dynamic IP type
: if
your ISP has provided the address of the DNS server, in the
IP
section,
deselect the
Obtain DNS server addresses automatically
checkbox and fill in the
Primary DNS server
field. Then in the
VPN
section, enter authorization data provided by your ISP (the username
(login) in the
Username
field and the password in the
Password
and
Password confirmation
fields), or select the
Without authorization
checkbox if authorization is not required. In the
VPN server address
field, enter the IP or URL address of the PPTP or L2TP authentication
server. If your ISP applies encryption, select a needed value from the
Encryption
drop-down list.
12.
If needed, fill in other fields on the page in accordance with data provided
by the ISP.
13.
Click the
Save
button.
21
Page 22 / 29
DIR-300NRU
Quick Installation Guide
Configuring User Tunnel
Create your WAN connection in accordance with data provided by your ISP.
Then create a connection of the PPTP or L2TP type.
1.
Go to the
Net / WAN
page and click the
Add
button.
2.
From the
Connection Type
drop-down list, select the needed value.
3.
Make sure that the
auto
value is selected from the
Port
drop-down list.
4.
Specify a name for your connection (any name for easier identification) in
the
Name
field.
5.
In the
VPN
section, enter authorization data to connect to a remote server
(the username (login) in the
Username
field and the password in the
Password
and
Password confirmation
fields), or select the
Without authorization
checkbox if authorization is not required. In the
VPN server address
field, enter the IP or URL address of the PPTP or
L2TP authentication server.
6.
Click the
Save
button.
22
Page 23 / 29
DIR-300NRU
Quick Installation Guide
Example of Connection via VLANs
If your ISP provides:
•
access to the Internet via the VLAN with the tag (VLAN ID)
2
, the
PPPoE
connection type, the login
user
, and the password
user_password
,
•
access to IPTV service via the VLAN with the tag (VLAN ID)
10
,
•
access to IP telephony via the VLAN with the tag (VLAN ID)
20
,
and your set-top box is connected to the LAN port 3, your VoIP phone is
connected to the LAN port 4 of the router, then follow the next steps to
configure the router.
1.
Go to the
Net / WAN
page, select the
WAN
connection and click the
Delete
button on the opened page.
2.
Go to the
Advanced / VLAN
page.
3.
Select the
lan
group.
4.
Select the line
port3
in the table at the bottom of the page and click the
Delete port
button.
5.
Select the line
port4
and click the
Delete port
button.
6.
Click the
Save changes
button.
7.
Select the
wan
group.
8.
In the
Name
field, enter a name for the group (
INTERNET
).
9.
From the
Type
drop-down list, select the
NAT
value.
10.
From the
Port
drop-down list, select the value
port5
(corresponds to the
INTERNET port of the router).
11.
From the
Tag
drop-down list, select the
tagged
value.
12.
In the
VLAN ID
field, enter
2
.
13.
Click the
Save changes
button.
You have created the group of ports for connection to the Internet.
23
Page 24 / 29
DIR-300NRU
Quick Installation Guide
14.
Click the
Add
button.
15.
In the
Name
field, enter a name for the new group (
IPTV
).
16.
From the
Type
drop-down list, select the
Transparent
value.
17.
From the
Port
drop-down list, select the value
port3
.
18.
From the
Tag
drop-down list, select the
untagged
value.
19.
From the
Port
drop-down list, select the value
port5
.
20.
From the
Tag
drop-down list, select the
tagged
value.
21.
In the
VLAN ID
field, enter
10
.
22.
Click the
Save changes
button.
You have created the group of ports for IPTV service.
23.
Click the
Add
button.
24.
In the
Name
field, enter a name for the new group (
VOIP
).
25.
From the
Type
drop-down list, select the
Transparent
value.
26.
From the
Port
drop-down list, select the value
port4
.
27.
From the
Tag
drop-down list, select the
untagged
value.
28.
From the
Port
drop-down list, select the value
port5
.
29.
From the
Tag
drop-down list, select the
tagged
value.
30.
In the
VLAN ID
field, enter
20
.
31.
Click the
Save changes
button.
You have created the group of ports for access to IP telephony.
24
Page 25 / 29
DIR-300NRU
Quick Installation Guide
32. Click the
Save&Reboot
line in the top-page menu displayed when the
mouse pointer is over the
System
caption.
33.
Log into the web-based interface and go to the
Net / WAN
tab.
34.
Click the
Add
button.
35. On the opened page, select the
PPPoE
value from the
Connection
Type
drop-down list.
36.
From the
Port
drop-down list, select the value
Ports:5.2
.
37.
In the
Username
field, enter
user
.
38.
Deselect the
Without authorization
checkbox.
39. In the
Password
and
Password confirmation
fields, enter
user_password
.
40.
Click the
Save
button.
25
19216811.live