Page 11 / 29
Scroll up to view Page 6 - 10
DIR-300NRU
Quick Installation Guide
Configuring Wi-Fi Adapter in OS Windows 7
1.
Click the
Start
button and proceed to the
Control Panel
window.
2.
Select the
Network and Sharing Center
section. (If the Control Panel
has the category view (the
Category
value is selected from the
View by
drop-down list in the top right corner of the window), choose the
View
network status and tasks
line under the
Network and Internet
section.)
3.
In the menu located on the left part of the window, select the
Change
adapter settings
line.
4.
In the opened window, select the icon of the wireless network connection
and make sure that your Wi-Fi adapter is on.
5.
To open the list of available wireless networks, select the icon of the
wireless network connection and click the
Connect To
button or left-
click the network icon in the notification area located on the right side of
the taskbar.
11
Page 12 / 29
DIR-300NRU
Quick Installation Guide
6.
In the opened window, in the list of available wireless networks, select the
wireless network
DIR-300NRU
B5
and click the
Connect
button.
7.
Wait for about 20-30 seconds. After the connection is established, the
network icon will be displayed as the signal level scale.
!
If you perform initial configuration of the router via Wi-Fi connection,
note that immediately after changing the wireless default settings of the
router you will need to reconfigure the wireless connection using the
newly specified settings.
12
Page 13 / 29
DIR-300NRU
Quick Installation Guide
CONFIGURING ROUTER
Connecting to Web-based Interface
1.
Start a web browser.
2.
In the address bar of the web browser, enter the IP address of the router
(by default, the following IP address is specified:
192.168.0.1
). Press
the
Enter
key.
3.
On the opened page, enter the username and password for the
administrator account
in the
Login
and
Password
fields
correspondingly (by default, the following username and password are
specified:
admin
,
admin
). Then click the
Enter
link.
!
If the error “
The page cannot be displayed
” (or “
Unable to display the
page
”/“
Could not connect to remote server
”) occurs upon connecting to
the web-based interface of the router, make sure that you have properly
connected the router to your computer.
13
Page 14 / 29
DIR-300NRU
Quick Installation Guide
Right after the first access to the web-based interface you are forwarded to the
page for changing the administrator password specified by default.
Enter a new password in the
Password
and
Confirmation
fields (you may
use digits, Latin letters (uppercase and/or lowercase), and characters available
on the keyboard), then click the
Save
link.
!
Remember or write down the new password for the administrator
account. In case of losing the new password, you can access the settings
of the router only after restoring the factory default settings via the
hardware
RESET
button. This procedure wipes out all settings that you
have configured for your router.
14
Page 15 / 29
DIR-300NRU
Quick Installation Guide
After successful registration the router's quick settings page opens.
The web-based interface of the router is multilingual. Select a needed language
from the menu displayed when the mouse pointer is over the
Language
caption. You can change the language of the web-based interface in any menu
item.
After selecting the language, the notification on unsaved changes will be
displayed. Click the
Save
icon (
) to save the current language of the
web-based interface as the default language.
15
19216811.live