Page 61 / 145
Scroll up to view Page 56 - 60
61
Using the Configuration Menu
Tools > Misc
Block WAN Ping-
Click
Enable
to block the WAN ping.
Computers on the Internet
will not get a reply back from the DI-804HV when it is being
“ping”ed.
This may help to increase security.
Restart Device-
Click Reboot to restart the unit.
Ping Test-
In the open box, enter an URL (i.e. www.dlink.com) or an IP ad-
dress and click on Ping to test your internet connection.
SPI Mode-
When this feature is enabled, the router will record the packet
information passed through the router such as IP address, port
address, ACK, SEQ number, and so on. The router will also
check every incoming packet to detect if it is valid.
DoS-
When DoS is enabled, the router will prevent Denial of Service
attacks on all computers connected to the DI-804HV.
Page 62 / 145
62
Using the Configuration Menu
Tools > Misc
Continued...
Non-standard
FTP port-
If an FTP server you want to access is not using the standard port
21, then enter in the port number that the FTP server is using in-
stead.
UPnP-
UPnP is short for Universal Plug and Play which is a networking
architecture that provides compatibility among networking equip-
ment, software, and peripherals. The DI-804HV is a UPnP enabled
router and will only work with other UPnP devices/softwares. If you
do not want to use the UPnP Functionality, it can be disabled by
selecting “Disabled”.
VPN Pass-
Through-
The device supports VPN (Virtual Private Network) pass-through for
both PPTP (Point-to-Point Tunneling Protocol) and IPSec (IP Secu-
rity). ONce VPN pass-through is enabled, there is no need to open
up virtual services. Multiple VPN connections can be made through
the device. This is useful when you have many VPN clients on the
LAN.
Page 63 / 145
63
Using the Configuration Menu
Status > Device Info
This screen displays information about the DI-804HV
DHCP Renew-
Click to refresh IP addresses sent from the DHCP server.
DHCP Release-
Click to release IP addreses sent from the DHCP server.
Page 64 / 145
64
Using the Configuration Menu
Status > Log
This screen displays activities occurring on the DI-804HV.
Log Settings-
Click for advanced features (see next page.)
First Page-
Click
First Page
to go to the first page of the log.
Last Page-
Click
Last Page
to go to the last page of the log.
Previous-
Click
Previous
to go to the previous page of the log.
Next-
Click
Next
to go to the next page of the log.
Clear-
Click
Clear
to clear the current page of the log.
Page 65 / 145
65
Using the Configuration Menu
Status > Log Settings
Email Address-
Enter in the email address of the recipient who will receive the
email log.
Enter in the IP address of a syslog server within the network.
Click
Enable
to activate the policy. The DI-804HV will send all
of it’s logs to the specified syslog server.
IP Address of the
Syslog Server
-
E-Mail Alert-
The DI-804HV can be set up to send the log files to a specific
email address.
SMTP Server IP-
Enter in the IP address of the mail server.
Send Mail Now-
Click to send mail immediately.
Log Type-
Select the types of activity to log. By default, all values are
selected.
19216811.live