Page 71 / 100
Scroll up to view Page 66 - 70
71
Frequently Asked Questions (continued)
Step 4
Check your IP Address. Your computer must have an IP Address in the same
range as the device you are attempting to configure. Most D-Link devices use the
192.168.0.X range.
How can I find my IP
Address in W
indows 95, 98, or
ME?
Step 1
Click on
Start
, then click on
Run
.
Step 2
The Run Dialogue Box will appear. Type
winipcfg
in the window as shown
then click
OK
.
Step 3
The
IP Configuration
window will appear, displaying your
Ethernet
Adapter Information
.
±
Select your adapter from the drop down menu.
±
If you do not see your adapter in the drop down menu, your adapter is
not properly installed.
Step 4
After selecting your adapter, it will display your IP Address, subnet
mask, and default gateway.
Step 5
Click
OK
to close the IP Configuration window.
Why can´t I access the web based configuration? (continued)
Page 72 / 100
72
Frequently Asked Questions (continued)
Step 4
(continued)
Check your IP Address. Your computer must have an IP Address
in the same range of the device you are attempting to configure. Most D-Link devices
use the 192.168.0.X range.
How can I find my IP
Address in W
indows 2000/XP?
Step 1
Click on
Start
and select
Run
.
Step 2
Type
cmd
then click
OK
.
Step 3
From the Command Prompt, enter
ipconfig
. It will return your IP
Address, subnet mask, and default gateway.
Step 4
Type
exit
to close the command prompt.
Why can´t I access the web based configuration? (continued)
Page 73 / 100
73
Frequently Asked Questions (continued)
Step 4
(continued)
Check your IP Address. Your computer must have an IP Address
in the same range of the device you are attempting to configure. Most D-Link devices
use the 192.168.0.X range.
Why can´t I access the web based configuration? (continued)
How can I assign a S
t
atic IP
Address in W
indows XP?
Step 1
Click on
Start > Control Panel > Network and Internet Connections >
Network connections
.
Step 2
See
S
tep 2
for Windows 2000 and continue from there.
How can I assign a S
t
atic IP
Address in W
indows 2000?
Step 1
Right-click on
My Network
Places
and select
Properties
.
Step 2
Right-click on the
Local
Area Connection
which represents
your network card and select
Properties
.
Highlight
Internet Protocol (TCP/
IP)
and click
Properties.
Page 74 / 100
74
Frequently Asked Questions (continued)
How can I assign a S
t
atic IP
Address in W
indows 2000?
(continued)
Click
Use the following IP Address
and
enter an IP Address that is on the same
subnet as the LAN IP Address on your
router.
Example: If the router´s LAN IP
Address 192.168.0.X where X = 2-99.
Make sure that the number you choose is
not in use on the network.
Set
the Default Gateway
to be the
same as the LAN IP Address of your
router (192.168.0.1).
Set
the Primary DNS
to be the same as
the LAN IP Address of your router
(192.168.0.1).
The Secondary DNS
is not needed or enter a DNS server from your ISP.
Click
OK
twice. You may be asked if you want to reboot your computer. Click
Yes
.
How can I assign a S
t
atic IP
Address in Windows 98/Me?
Step 1
From the desktop, right-click on the
Network Neigborhood
icon (Win ME - My
Network Places) and select
Properties
Highlight
TCP/IP
and click the
Properties
button. If you have more than 1 adapter,
then there will be a TCP/IP “Binding” for
each adapter. Highlight
TCP/IP > (your
network adapter)
and then click
Properties
.
Why can´t I access the web based configuration? (continued)
Page 75 / 100
75
Frequently Asked Questions (continued)
How can I assign a S
t
atic IP
Address in W
indows
98/Me?
(continued)
Step 2
Click
Specify an IP Address
.
Step 3
Click on the
Gateway
tab.
Enter the LAN IP Address of your router
here (192.168.0.1).
Click
Add
when finished.
Step 4
Click on the
DNS Configuration
tab.
Enter in an IP Address that is on the same
subnet as the LAN IP Address on your router.
Example: If the router´s LAN IP Address is
192.168.0.1, make your IP Address
192.168.0.X where X is between 2-99. Make
sure that the number you choose is not in
use on the network.
Step 5
Click
OK
twice.
Click
Enable DNS
. Type in a
Host
(can be
any word). Under DNS server search order,
enter the LAN IP Address of your router
(192.168.0.1). Click
Add
.
When prompted to reboot your computer,
click
Yes
.
After you reboot, the computer will now have
a static, private IP Address.
Why can´t I access the web based configuration? (continued)
Step 5
Access the web management. Open your web
browser and enter the IP Address of your D-Link device in
the address bar. This should open the login page for the web
management. Follow instructions to login and complete the configuration.
19216811.live