Page 16 / 24
Scroll up to view Page 11 - 15
1´
D-Link DI-7±4GU Quick Install Guide
Wireless Setup
Enter a PassPhrase that is
between 8 to 63 characters and
is alphanumeric.
Click
Next
WPA-PSK
Click
Restart
For additional settings or information, refer to the
Advanced, Tools,
or
Status
tabs
on the web-management interface; or to the Manual
located on the CD.
You will be returned to the
Home
tab. Close this web browser window
and open a new one (i.e.,
Internet Explorer
or
Netscape
®
Navigator
).
Link to your favorite Web site to test your Internet connection.
Your Setup is Complete!
Test Internet Connection
Page 17 / 24
17
D-Link DI-7±4GU Quick Install Guide
Printer Wizard
Make sure your printer is connected to the USB port on the router.
Printer Wizard
Click
Run Printer Wizard
Click
Next
Click
Next
The wizard will identify the make
and model of your printer, as
well as its status.
Page 18 / 24
1µ
D-Link DI-7±4GU Quick Install Guide
Printer Wizard
Click
Next
Click
Next
to run the Printer
Setup application.
Click
Run
This application can only run
when accessed from the router.
Do not click
Save
.
Click
Run
Page 19 / 24
1¶
D-Link DI-7±4GU Quick Install Guide
Printer Wizard
You may need to supply the
drivers for your printer if they
are not built into Windows
®
.
Click
Browse
to locate the
driver and then click
OK
.
Once the wizard has completed installing your printer, you will be
prompted to print a test page to verify its functionality.
Click
Finish
Click
OK
Click
OK
Page 20 / 24
±0
D-Link DI-7±4GU Quick Install Guide
Appendix
Appendix
To connect to the network, make sure
the network adapter in your computer
is configured properly. Here’s how to
configure the network adapter to obtain an
IP address automatically for the DI-724GU
Wireless Broadband Router.
For
Microsoft Windows
®
XP:
Right click on
My Network Places
and select
Properties.
Right click
on the
Network Connection
associated with the Ethernet adapter
and select
Properties
(i.e., D-Link
DFE-530TX+).
Click
OK
Click
OK
Select
Obtain an IP Address
automatically
.
Click
Internet Protocol (TCP/IP)
and then click
Properties.