D-Link DI-724GU Router Manual PDF (Setup & Configuration Guide)
Given below is full router user manual of D-Link DI-724GU router model. You can also download this manual in PDF Format to read later on your computer.
Product user manuals come handy in case you want to know all functionalities of your device, troubleshooting, fist time configuration & setup and in many other situations.
Page 1 / 24
Wireless
G USB 2.0 Adapter
Wireless Internet Camera
with 3G Mobile Video
Page 2 / 24
±
D-Link DI-7±4GU Quick Install Guide
System Requirements
• Ethernet-based Cable or DSL Modem
• Computers with Windows
®
, Macintosh
®
, or Linux-based operating
systems with an installed Ethernet adapter
• Internet Explorer 6.x and above, or Netscape
®
Navigator 7.0 and
above
Package Contents
D-Link DI-724GU
Wireless 108G Gigabit QoS Router
System Requirements
If any of the above items are missing, please contact your reseller.
CAT5 Ethernet Cable
Power Adapter
CD-ROM with
Manual
Page 3 / 24
²
D-Link DI-7±4GU Quick Install Guide
Hardware Overview
Hardware Overview
Power LED
A solid light indicates a
proper connection to the
power supply.
USB LED
A solid light indicates a connection
to the USB port. This LED blinks
during data transmission.
Status LED
A blinking light indicates that
the DI-724GU is functioning
properly.
WLAN LED
A solid light indicates that the wireless
segment is ready. This LED blinks
during wireless data transmission.
Local Network LEDs
A solid light on each port
indicates a connection to an
Ethernet enabled device.
These LEDs blink during data
transmission.
WAN LED
A solid light indicates a connection
on the WAN port. This LED blinks
during data transmission.
Page 4 / 24
4
D-Link DI-7±4GU Quick Install Guide
Hardware Overview
USB Port
Connection for a USB printer.
LAN Ports
These are the connections for Ethernet cables to
Ethernet-enabled computers.
Power Receptor
WAN Port
This is for the connection of an Ethernet
cable to your Cable or DSL modem.
Reset Button
Pressing this button restores the Router to
its original factory default settings.
Antennas
Used to connect to 802.11g or
802.11b wireless adapters.
Page 5 / 24
³
D-Link DI-7±4GU Quick Install Guide
Hardware Installation
Hardware Installation
A
.
First, connect the power adapter to the receptor at the back panel
of the DI-724GU and then plug the other end of the power adapter
to a wall outlet or power strip. The Power LED will turn ON to
indicate proper operation.
B
.
1. Power off your Cable or DSL modem; some devices may not
have a on/off switch and will require you to unplug the power
adapter. Now, the DI-724GU should be powered on and the
Cable/DSL modem should be turned off.
2. Cable/DSL modem (
Power Off
) – DI-724GU (
Power On
) Connect
an Ethernet cable to the Ethernet jack located on the Cable/DSL
modem. After the Ethernet cable is securely connected, power
on the Cable/DSL modem by turning on the unit or plugging in
the power adapter.
3. Cable/DSL modem (
Power On
) – DI-724GU (
Power On
) Insert
the other end of the Ethernet cable to the WAN PORT on the
back panel of the DI-724GU. The WAN LED light will illuminate
to indicate proper connection. If the WAN LED is not illuminated,
please go back to step B1 and repeat the instructions.
C
.
Insert an Ethernet cable to LAN port 1 on the back panel of the
DI-724GU and an available Ethernet port on the network adapter
in the computer you will use to configure the DI-724GU. The LED
light for LAN Port 1 will illuminate to indicate proper connection.
Note:
The LAN Ports on the DI-724GU are Auto-MDI/MDIX.
Meaning you can use a straight-through or crossover Ethernet
cable to the LAN Ports
.
D
.
Computers equipped with 802.11g wireless adapters will be able
to connect to the DI-724GU. The DWL-G650
Air
Plus
Xtreme G
Wireless Cardbus Adapter and the DWL-G520
Air
Plus
Xtreme G
Wireless PCI Adapter will be able to connect out of the box with
19216811.live