Page 11 / 16 Scroll up to view Page 6 - 10
11
Wait until the following
Welcome
dialog appears.
Select the destination folder.
Click
Next
Click
Next
Select your Windows
operating system
Page 12 / 16
12
After rebooting your computer, the software installation procedure is finished.
Installing the Print Server Software (continued)
Configuring on Windows 98se/Me Platforms
After you finish the software installation
procedure, your computer will be capable
of network printing provided by the DI-
714P+. For convenience, we call the
printer connected to the printer port of the
DI-714P+ a
printer
server
. On a Windows
95/98 platform, open the
Printers
window
in the
My Computer
menu.
Click
OK
Now, you can configure the print server of
the DI-714P+:
Find out the corresponding icon of your
printer server
, for example, the
HP
LaserJet 6L
. Right click on that icon,
and then select
Properties.
The following screen appears:
Then, the setup program will begin
to install the programs into the
destination folder.
When the following window is
displayed.
Click
Finish
Page 13 / 16
Choose the “PRTmate: (All-in-1)”
from the list attached at the
Print
To
item. Be sure that the
Printer
Driver
item is configured to the
correct driver of your
printer server.
Type in the IP address of the
DI-714P+.
Configuring on Windows 2000/XP Platforms
The configuration procedure for a
Windows 2000/XP platform is similar to
that of Windows 95/98 except the
screen of printer
Properties
:
(Note: Screen shots are taken in Windows 2000,
similar screens will appear in Windows XP.)
Click
Port
Click
Configure Port
Type in the IP address of the
DI-714P+.
Configuring on Windows 98se/Me Platforms (continued)
Click
on the
Details tab
Click
Port Settings
Click
OK
Click
OK
Page 14 / 16
14
To connect to the network, make sure
the network adapter in your computer
is configured properly. Here’s how to
configure the network adapter to obtain
an IP address automatically for the
DI-714P+ Router.
For
Microsoft Windows XP:
Go to
Start
>
right click
on
My Network Places
>
select
Properties
>
Double-click
on
the
Network Connection
associated
with the Ethernet adapter (i.e.,
D-Link DFE-530TX+).
APPENDIX (continued)
Click
Internet Protocol (TCP/IP)
Click
Properties
Select
Obtain an IP address
automatically
Restart
your
computer
Click
OK
Page 15 / 16
15
For
Apple Macintosh OS X:
Go to
the Apple Menu
Click on
Network
and
Select
System
Preferences
The IP address information,
the Subnet Mask, the Router’s
IP address and the Ethernet
adapter address will appear
Select
Built-in Ethernet
in the show pull down
menu
Click on
Network
Click on
Apply Now
Select
Using DHCP
in
the Configure pull down
menu

Rate

4.5 / 5 based on 2 votes.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top