Page 6 / 16
Scroll up to view Page 1 - 5
6
The Setup Wizard (continued)
Select your Internet Con-
nection.
You will be
prompted to select the type of
Internet connection for your
router.
Click
Next
Choose your time zone
from
the drop down list.
Click
Next
If you are unsure of which setting to select,
please contact your Internet Service Provider.
Select
Others
only if you use PPTP in Europe or Big
Pond Cable in Australia.
Page 7 / 16
7
The Setup Wizard (continued)
If your ISP requires a
Static
IP Address
, and this option is
selected, then this screen will
appear:
Enter the IP address informa-
tion originally provided to you
by your ISP. You will need to
complete all the required
fields.
Click
Next
If you selected
Dynamic IP
Address
, this screen will
appear:
(Used mainly for
Cable Internet service.)
Click
the
“
Clone MAC Address”
button to automatically copy the
MAC address of the network
adapter in your computer. You can
also manually type in the MAC
address.
Click
Next
This setup should be done on
the computer that is registered
on the ISP’s network.
Please continue to the last part of step 4,
Wireless Setup.
Please continue to the last part of step 4,
Wireless Setup.
Page 8 / 16
8
The Setup Wizard (continued)
If your ISP uses
PPPoE
(Point-to-Point Protocol over
Ethernet), and this option is
selected, then this screen will
appear: (Used mainly for DSL
Internet service.)
Wireless Setup.
The default wireless settings
for your 802.11b wireless
network are:
SSID =
default
Channel =
6
You can change these settings
to match an existing wireless
network.
Please be sure to remove any
existing PPPoE client software
installed on your computers.
Enter in the username and
password provided to you by
your ISP.
Click
Next
Click
Next
Page 9 / 16
9
Your Setup is Complete!
Click
Restart
If you wish to use encryption
for your 802.11b network, the
DI-714P+ is capable of three
levels of wireless encryption -
64-bit, 128-bit, and 256-bit.
By
default the encryption is
disabled.
You can change
the encryption settings for
more secure wireless commu-
nication.
Click
Next
The Setup Wizard (continued)
Page 10 / 16
10
APPENDIX
Insert the installation CD-ROM into the
CD-ROM drive. The following window
will be shown automatically. If it is not,
please run “autorun.exe” on the CD-
ROM.
Installing the Print Server Software
Click
Install Windows
Printer Software
Test Internet Connection.
You will be returned to the
Home
tab.
For additional settings
or information, refer to
the
Advanced, Tools,
or
Status
tabs
on the
web-management
interface; or to the
Manual located on the
CD.
Then
relaunch
your
Web browser (i.e.,
Internet Explorer
or
Netscape Navigator
),
to link to your favorite
Web site to test your
Internet connection.
Click
to
Exit
19216811.live