D-Link DI-704UP Router Manual PDF (Setup & Configuration Guide)

Page 96 / 109 Scroll up to view Page 91 - 95

96

Frequently Asked Questions (continued)

To play SOCOM and hear audio, you must download the latest firmware for the router

(if needed), enable Game Mode, and open port 6869 to the IP Address of your

Playstation.

Step 1

Upgrade the firmware.

Step 2

Log into the web based configuration by typing in the IP Address of the

router (default:192.168.0.1) in your web browser. The username is

admin

(all

lowercase) and the password is blank (empty).

Step 3

Click on the

Advanced

tab and then click on

Virtual Server

on the left side.

Step 4

You will now create a new Virtual Server entry. Click

Enabled

and enter a

name (socom). Enter the IP Address of your Playstation for

Private IP

.

Step 5

For

Protocol Type

select Both. Enter

6869

for both the

Private Port

and

Public Port

. Click

Always

. Click

Apply

to save changes and then

Continue

Step 6

Click on the

Tools

tab and then

Misc

on the left side.

Step 7

Make sure

Gaming Mode

is Enabled. If not, click

Enabled

. Click

Apply

and then

Continue

.

How do I set up my router for SOCOM on my Playstation 2?

socom

100

6869

Both

Downloaded from

www.Manualslib.com

manuals search engine

Page 97 / 109

97

NAME

- Gamespy1

PRIVATE IP

- The IP

Address of your computer

that you are running

Gamespy from.

PROTOCOL TYPE

- Both

PRIVATE PORT

- 3783

PUBLIC PORT

- 3783

SCHEDULE

- Always.

NAME

- Gamespy2

PRIVATE IP

- The IP Address of

your computer that you

are

running Gamespy from.

PROTOCOL TYPE

- Both

PRIVATE PORT

- 6500

PUBLIC PORT

- 6500

SCHEDULE

- Always.

Frequently Asked Questions (continued)

Step 1

Log into the web based configuration by typing in the IP Address of the

router (default:192.168.0.1) in your web browser. The username is

admin

(all

lowercase) and the password is blank (empty).

Step 2

Click on the Advanced tab and then click Virtual Server on the left side.

Step 3

You will create 2 entries.

Step 4

Click Enabled and enter settings:

Click

Apply

and then

Continue

Step 5

Click Enabled and enter settings:

Click

Apply

and then

Continue

.

How can I use Gamespy behind my D-Link router?

Both

100

gamespy1

3783

100

gamespy2

Both

6500

Downloaded from

www.Manualslib.com

manuals search engine

Page 98 / 109

98

Note: Make sure that you did not enable proxy/firewall in the KaZaA software.

Frequently Asked Questions (continued)

How do I configure my router for KaZaA and Grokster?

The following is for KaZaA, Grokster, and others using the FastTrack P2P file sharing

system.

In most cases, you do not have to configure anything on the router or on the Kazaa

software. If you are having problems, please follow steps below:

Step 1

Log into the web based configuration by typing in the IP Address of the router

(default:192.168.0.1) in your web browser. The username is

admin

(all lowercase) and

the password is blank (empty).

Step 2

Click on

Advanced

and then click

Virtual Server

.

Step 3

Click

Enabled

and then enter a

Name

(kazaa for example).

Step 4

Enter the IP Address of the computer you are running KaZaA from in the

Private IP box. Select TCP for the Protocol Type.

Step 5

Enter 1214 in the Private and Public Port boxes. Click

Always

under

schedule or set a time range. Click

Apply

.

kazaa

100

6500

Downloaded from

www.Manualslib.com

manuals search engine

Page 99 / 109

99

Frequently Asked Questions (continued)

How do I configure my router to play

Warcraft 3?

To host a Warcraft 3 game, you must open ports on your router to allow incoming

traffic. To play a game, you do not have to configure your router.

Warcraft 3 (Battlenet) uses port 6112.

For the DI-704UP:

Step 4

Click

Apply

and then

Continue

.

Note:

If you want multiple computers from you LAN to play in the same game that

you are hosting, then repeat the steps above and enter the IP Addresses of the other

computers. You will need to change ports. Computer #2 can use port 6113, computer

#3 can use 6114, and so on.

You will need to change the port information within the Warcraft 3 software for

computers #2 and up.

Configure the Game Port information on each computer:

Start Warcraft 3 on each computer, click

Options

>

Gameplay

. Scroll down and you

should see

Game Port

. Enter the port number as you entered in the above steps.

Step 1

Log into the web based

configuration by typing in the IP

Address of the router

(default:192.168.0.1) in your web

browser. The username is

admin

(all lowercase) and the password is

blank (empty).

Step 2

Click on

Advanced

and

then click

Virtual Server

.

Step 3

Create a new entry: Click

Enabled

. Enter a name (warcraft3).

Private IP - Enter the IP Address of

the computer you want to host the

game. Select

Both

for Protocol Type

Enter

6112

for both Private Port and

Public Port Click

Always

or set a

schedule.

100

warcraft3

6112

both

Downloaded from

www.Manualslib.com

manuals search engine

Page 100 / 109

100

Frequently Asked Questions (continued)

How does NetMeeting work with my D-Link Router?

Unlike most TCP/IP applications, NetMeeting uses

DYNAMIC PORTS

instead of

STATIC PORTS. That means that each NetMeeting connection is somewhat different

than the last. For instance, the HTTP web site application uses port 80. NetMeeting

can use any of over 60,000 different ports.

All broadband routers using only standard NAT and all internet sharing programs like

Microsoft ICS that use only standard NAT will NOT work with NetMeeting or other

h.323 software packages.

In order to use NetMeeting with your D-LInk router, you need to put the router in DMZ.

Note:

A few hardware manufacturers have taken it on themselves to actually provide

H.323 compatibility. This is not an easy task since the router must search each

incoming packet for signs that it might be a netmeeting packet. This is a whole lot

more work than a router normally does and may actually be a

weak point in the

firewall

. D-Link is not one of the manufacturers.

To read more on this visit

http://www

.HomenetHelp.com

How do I set up my router to use iChat?

-for Macintosh users-

You must open ports on your router to allow incoming traffic while using iChat.

iChat uses the following ports: 5060 (UDP) 5190 (TCP) File Sharing 16384-16403

(UDP) to video conference with other clients

Step 1

Log into the web based configuration by typing in the IP Address of the router

(default:192.168.0.1) in your web browser. The username is

admin

(all lowercase) and

the password is blank (empty).

Step 2

Click on

Advanced

and then click

Firewall

.

Downloaded from

www.Manualslib.com

manuals search engine

Rate

Popular D-Link Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share