Page 56 / 109
Scroll up to view Page 51 - 55
56
Using the Configuration Menu (continued)
Status > Log Settings
Send E-Mail alert to:
Enter in the email address of the recipient who will receive the email log.
Log Settings
Displays the logs of activities and events, and can be setup to send these logs to
another location.
E-Mail Alert:
The DI-704UP can be set up to send the log files to a specific email address.
SMTP Server IP:
Input the SMTP information. Usually, this is provided by your Internet Service Provider
(ISP).
Send Mail Now:
Click to send mail now.
Downloaded from
www.Manualslib.com
manuals search engine
Page 57 / 109
57
Using the Configuration Menu (continued)
Help
Help
This menu displays the complete
Help
menu. For help at anytime, click on the
Help
tab
in the configuration menu.
Downloaded from
www.Manualslib.com
manuals search engine
Page 58 / 109
58
Installing the Print Server Software
Insert the installation CD-ROM into the CD-ROM drive. The following window will be
shown automatically. If it is not, please run “install.exe” on the CD-ROM.
Click
Next
Click
Install Print
Server Software
Click
to Install Print
Server Software for
either Windows 98SE/ME
or Windows 2000/XP
Downloaded from
www.Manualslib.com
manuals search engine
Page 59 / 109
59
Installing the Print Server Software (continued)
Select the destination folder.
After rebooting your computer, the software installation procedure is finished.
Click
Next
Click
Browse
to
select a destination
folder
Click
Finish
Click
OK
Select the
option for
restarting the
computer
.
Downloaded from
www.Manualslib.com
manuals search engine
Page 60 / 109
60
Configuring on Windows 98SE/ME Platforms
After you finish the software installation proce-
dure, your computer will be capable of network
printing provided by the DI-704UP. On a Win-
dows 95/98 platform, open the
Printers
win-
dow in the
My Computer
menu.
Now, you can configure the print server of
the DI-704UP: Find the corresponding
icon for your
printer
, for example, the
Epson Stylus C60 Series
. Right click on
that icon, and then select
Properties.
The screen at the right will appear.
Choose the “D-Link LPT port (Print
Server)” from the list attached at the
Print
To
item. Be sure that the
Printer Driver
item is configured to the correct driver of
your printer.
Click
on the
Details
tab
Click
Port Settings
Installing the Print Server Software (continued)
Downloaded from
www.Manualslib.com
manuals search engine
19216811.live