Page 51 / 109
Scroll up to view Page 46 - 50
51
Using the Configuration Menu (continued)
Tools > Misc
Downloaded from
www.Manualslib.com
manuals search engine
Page 52 / 109
52
Using the Configuration Menu (continued)
Tools > Misc
Block WAN Ping:
Click
Enable
to block the WAN ping.
Computers on the Internet will not get a reply back
from the DI-704UP when it is being “ping”ed. This may help to increase security.
Reboot:
Click
Reboot
to restart the unit.
SPI Mode:
Stateful Packet Inspection is a form of firewall protection that will inspect all of the pack-
ets transmitted through the DI-704UP. It carefully inspects all incoming packets and if the
packets contain suspicious information, it will automatically drop those packets.
VPN Pass Through:
For users who telecommute or use Virtual Private Network (VPN), you can select PPTP
or IPSec to be used with this router.
UPnP Setting:
Universal Plug and Play is a feature that is preset to allow certain popular applications
such as MSN messenger to be functional using the router without making any configura-
tions. By default, theUPnP Setting is set to enable. It is recommended to keep the UPnP
Setting on enable.
Non-standard FTP port:
If an FTP server you want to access is not using the standard port 21, then enter in the
port number that the FTP server is using instead.
Ping Test:
This
diagnostic utility can be used to check if a computer is on the Internet. It sends
ping packets and listens for replies from the specific host.
Downloaded from
www.Manualslib.com
manuals search engine
Page 53 / 109
53
Using the Configuration Menu (continued)
Status > Device Info
This page in the Configuration Utility displays the current information for the Broadband
Router. It will display the WAN, LAN, and MAC address information. If your WAN
connection is set up for
Dynamic IP
address a
Release
button and
Renew
button
will be displayed. Use
Release
to disconnect from your ISP and use
Renew
to connect
to your ISP. If your WAN connection is set up for
PPPoE
, a
Connect
button and
Disconnect
button will be displayed. Use
Disconnect
to drop the PPPoE connection
and use
Connect
to establish the PPPoE connection. This page allows you to observe
the DI-704UP’s working status:
Downloaded from
www.Manualslib.com
manuals search engine
Page 54 / 109
54
Using the Configuration Menu (continued)
Status > Device Info
LAN
LAN MAC Address:
Displays the LAN port MAC/hardware address.
IP Address:
LAN/Private IP Address of the DI-704UP.
Subnet Mask:
LAN/Private Subnet Mask of the DI-704UP.
WAN
WAN MAC Address:
Displays the WAN port MAC/hardware address.
IP Address:
WAN/Public IP Address.
Subnet Mask:
WAN/Public Subnet Mask.
Gateway:
WAN/Public Gateway IP Address.
Domain Name Server:
WAN/Public DNS IP Address.
PeripheralPrinter:
Status of the USB print server port.
Downloaded from
www.Manualslib.com
manuals search engine
Page 55 / 109
55
Using the Configuration Menu (continued)
Status > Log
The Broadband Router keeps a running log of events and activities occurring on the
router. If the device is rebooted, the logs are automatically cleared. You may save the
log files under
Log Settings
.
First Page:
The first page of the log.
Last Page:
The last page of the log.
Previous:
Moves back one log page.
Next:
Moves forward one log page.
Clear:
Clears the logs completely.
Log Settings:
Brings up the page to configure the logs.
Downloaded from
www.Manualslib.com
manuals search engine
19216811.live