Page 36 / 104
Scroll up to view Page 31 - 35
36
DI-624M User’s Manual
D-Link Systems, Inc.
Using the Configuration Menu
admin
is the
Administrator login name.
Enter the password and enter again to confirm.
user
is the
User login name.
Enter the password and enter again to confirm
Remote management allows the DI-624M to be configured from
the Internet by a web browser. A username and password is
still required to access the Web-Management interface. In
general, only a member of your network can browse the built-
in web pages to perform
Administrator
tasks. This feature
enables you to perform Administrator tasks from the remote
(Internet) host.
The Internet IP address of the computer that has access to the
Broadband Router. If you input an asterisk (*) into this field,
then any computer will be able to access the Router. Putting an
asterisk (*) into this field would present a security risk and is
not recommended.
The port number used to access the Broadband Router.
Broadband Router and 8080 is the port used for the Web-
Mangement interface.
Administrator:
Password:
User:
Password:
Remote
Management:
IP Address:
Port:
Example:
Page 37 / 104
37
DI-624M User’s Manual
D-Link Systems, Inc.
Using the Configuration Menu
Time
Select the Time Zone from the pull-down menu.
NTP is short for
Network Time Protocol.
NTP synchronizes
computer clock times in a network of computers. This field is
optional.
To manually input the time, enter the values in these fields for
the Year, Month, Day, Hour, Minute, and Second. Click
Set Time
.
To select Daylight Saving time manually, select
enabled
or
disabled,
and enter a start date and an end date for daylight
saving time.
Tools > Time
Time Zone:
Default NTP
Server:
Set the Time:
Daylight Saving:
Page 38 / 104
38
DI-624M User’s Manual
D-Link Systems, Inc.
Using the Configuration Menu
System
Browse
The current system settings can be saved as a file onto the local hard drive. The saved
file or any other saved setting file can be loaded back on the Broadband Router. To
reload a system settings file, click on
Browse
to browse the local hard drive and locate
the system file to be used. You may also reset the Broadband Router back to factory
settings by clicking on
Restore
.
Click
Save
to save the current settings to the local Hard Drive.
Click
Browse
to find the settings, then click
Load
.
Click
Restore
to restore the factory default settings.
Tools > System
Save Settings to
Local Hard Drive:
Load Settings
from Local Hard
Drive:
Restore to Factory
Default Settings:
Page 39 / 104
39
DI-624M User’s Manual
D-Link Systems, Inc.
Using the Configuration Menu
Firmware
You can upgrade the firmware of the Router here. Make sure the firmware you want to
use is on the local hard drive of the computer. Click on
Browse
to browse the local hard
drive and locate the firmware to be used for the update. Please check the D-Link support
upgrades to your hard drive from the D-Link support site.
Click on the link in this screen to find out if there is an updated
firmware; if so, download the new firmware to your hard drive.
After you have downloaded the new firmware, click
Browse
in
this window to locate the firmware update on your hard drive.
Click
Apply
to complete the firmware upgrade.
Tools > Firmware
Firmware Upgrade:
Browse:
Page 40 / 104
40
DI-624M User’s Manual
D-Link Systems, Inc.
Using the Configuration Menu
Misc.
Tools > Misc.
19216811.live