Page 46 / 74
Scroll up to view Page 41 - 45
46
Using the Configuration Menu
Status > Log > Log Settings
Email Address
Enter in the email address of the recipient who will receive
the email log.
Selecting this allows you to save the log to a local hard drive.
A window will appear prompting you to save the file to a spe-
cific location.
Save Log File to Lo-
cal Hard Drive
E-Mail Alert
The DI-614+ can be set up to send the log files to a specific
email address.
SMTP Server IP
Enter in the IP address of the mail server.
Send Mail Now
Click to send mail immediately.
Log Type
Select the types of activity to log.
Page 47 / 74
47
Using the Configuration Menu
Status > Stats
In Stats section, traffic statistics are displayed.
Refresh
This will update the page.
Reset
This will reset the packet counter to zero.
WAN
Displays Received / Transmitted packets from the WAN port.
LAN
Displays Received / Transmitted packets from the LAN port.
WIRELESS
Displays received and transmitted packets from the wireless
network.
Page 48 / 74
48
Using the Configuration Menu
Status > Wireless
The wireless client table displays a list of current connected wireless clients.
This
table also displays the time and MAC address of the wireless client connected.
Page 49 / 74
49
Using the Configuration Menu
Help
This screen displays the complete
Help
menu. For help at anytime, click the
Help
tab
in the Configuration menu.
Page 50 / 74
50
Troubleshooting
This chapter provides solutions to problems that can occur during the installation and
operation of the DI-614+ Wireless Access Point.
We cover various aspects of the
network setup, including the network adapters.
Please read the following if you are
having problems.
(Note:
I
t is recommended that you use an Ethernet connection to configure the DI-614+
Access Point.
)
1.
The computer used to configure the DI-614+ cannot access the
Configuration menu.
Check that the
Ethernet LED
on the DI-614+ is
ON
.
If the
LED
is not
ON
, check that the cable for the Ethernet connection is securely
inserted.
Check that the Ethernet Adapter is working properly.
Please see
item 6 (
Check that the drivers for the network adapters are installed
properly
) in this
Troubleshooting
section to check that the drivers are
loaded properly.
Check that the
IP Address
is in the same range and subnet as the
DI-614+.
Please see
Checking the IP Address
in Windows XP
in the
Networking Basics
section of this manual.
Note:
All the computers on the network
must have a unique IP Address in the same range, e.g., 192.168.0.x. and a Subnet Mask
of 255.255.255.0. Any computers that have identical IP Addresses will not be visible on the
network.
Do a
Ping test
to make sure that the DI-614+ is responding.
Go to
Start
>
Run
>Type
Command
>Type
A successful ping
will show four replies.
19216811.live