D-Link DI-604 Router Manual PDF (Setup & Configuration Guide)

Page 16 / 49 Scroll up to view Page 11 - 15

16

HOME > WAN > PPPOE

Choose PPPoE (Point to Point Protocol over Ethernet) if your ISP uses PPPoE

connection. Your ISP will provide you with a username and password. This option is

typically used for DSL services.

PPPoE Account:

Your PPPoE account is provided by your ISP

PPPoE Password:

Your PPPoE password is provided by your ISP

Primary DNS Address:

Primary DNS IP Address is provided by your ISP

Secondary DNS Address:

optional

Maximum Idle Time:

The amount of time of inactivity before disconnecting

your PPPoE session. Enter a Maximum Idle Time (in minutes) to define a

maximum period of time for which the Internet connection is maintained

during inactivity. If the connection is inactive for longer than the defined

Maximum Idle Time, then the connection will be dropped. Either set this to

zero or enable Auto-reconnect to disable this feature.

PPPoE Service Name:

Enter the Service Name provided by your ISP.

(optional)

Assigned IP Address:

This option is only available for Static PPPoE.

Enter

in the Static IP Address for the PPPoE connection.

Click

Apply

if you have made changes.

Page 17 / 49

HOME > LAN

LAN is short for Local Area Network. This is considered your internal

network. These are the IP settings of the LAN interface for the DI-

604

. These

settings may be referred to as Private settings. You may change the LAN IP

address if needed. The LAN IP address is private to your internal network

and cannot be seen on the Internet.

LAN IP Address:

The IP address of the LAN interface. The default IP

address is 192.168.0.1.

DHCP Server:

Choose

Enable

or

Disable

The range of the IP Address Pool:

Whenever there is a request, the DHCP

server will automatically allocate an unused IP Address from the

IP Address

Pool

to the requesting computer.

You must specify the starting and ending

address of the IP Address pool.

Domain Name:

This field is optional. Enter in the your local domain name.

Click

Apply

if you have made any changes.

DHCP stands for Dynamic Host Control Protocol. The DI-604 has a built-in DHCP server. The DHCP

Server will automatically assign an IP address to the computers on the LAN/private network. Be sure

to set your computers to be DHCP clients by setting their TCP/IP settings to “Obtain an IP Address

Automatically.”

When you turn your computers on, they will automatically load the proper TCP/IP

settings provided by the DI-604. The DHCP Server will automatically allocate an unused IP address

from the IP address pool to the requesting computer. You must specify the starting and ending

address of the IP address pool.

Page 18 / 49

18

ADVANCED > VIRTUAL SERVER

The firewall filters out unrecognized packets to protect your LAN (local area network);

so all computers networked with the DI-604 are invisible to the outside world.

If you

wish, you can make some of them accessible by enabling the

Virtual Server

Mapping.

A virtual server is defined as a

Service Port

, and all requests to this port will be

redirected to the computer specified by the

Server IP

.

For example, if you have an FTP server (port 21) at 192.168.0.1, a Web server (port

80) at 192.168.0.2, and a VPN server at 192.168.0.6, then you need to specify the

following virtual server-mapping table:

Service Port

Server IP

Enable

21

192.168.0.1

V

80

192.168.0.2

V

1723

192.168.0.6

V

Page 19 / 49

Some applications require multiple connections, like Internet games, Video

conferencing, Internet telephony and so on. Due to the firewall function,

these applications cannot work without some intervention.

Special

Applications

makes some of these applications work with the DI-604. If

Special Applications

is still insufficient to allow an application to function

correctly, try the

DMZ Host

in the

Miscellaneous Items

options.

Trigger

: the outbound port number the application issued first.

Incoming Ports

: when the trigger packet is detected, the inbound packets to

the specified port numbers are allowed to pass the firewall.

The DI-604 provides some predefined settings in the gray pad on the bottom

of the web page. Select your application in the

Popular applications

pull-

down menu and click

Copy

to

in order to copy the predefined setting.

Note! At any time, only one PC can use each Special Application tunnel.

Click

Apply

if you have made any changes.

ADVANCED > APPLICATIONS

Page 20 / 49

20

ADVANCED>FILTER

MAC Address Control

allows you to assign different access rights for different

users and to assign a specific IP address to a certain MAC address.

MAC Address Control:

Check

Enable

to enable the

MAC Address Control.

All of

the settings in this page will take effect only when

Enable

is checked.

Connection control:

Check

Connection control

to control what wired and wireless

clients can connect to this device. If a client is denied connection to this device, it

means the client can't access the Internet either. Choose "allow" or "deny" to allow

or deny the clients, whose MAC addresses are not in the "Control table" (please see

below), to connect to this device.

MAC Address

MAC address indicates a specific client.

IP Address

Expected IP address of the corresponding

client. You may choose to leave this field

empty.

C

When "

Connection control

" is checked,

check "

C

" to allow the corresponding client

to connect to this device.

Rate

Popular D-Link Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share