Page 11 / 49 Scroll up to view Page 6 - 10
Static IP Address
If you selected
Static IP
Address
, you will see the
following page.
Enter in the IP address
information provided to you
by your ISP. You will need
to enter in WAN IP Address,
WAN Subnet Mask, WAN
Gateway, and Primary
DNS.
Click
Next
Dynamic IP
Address
If you selected
Dynamic IP
Address
, you will see the
following page.
If your ISP requires you to
enter a specific host name
or specific MAC address,
please enter it in. The
CLONE MAC Address
button is used to copy the
MAC address of your Ethernet adapter to the DI-604 WAN interface.
Click
Next
Dynamic IP
Address for
BigPond Cable
If you selected
Dynamic
IP Address with
RoadRunner Session
Management
, you will
see the following page.
If your ISP requires you
to enter a specific host
name or specific MAC
address, please enter it in. The CLONE MAC Address button is used to copy
the MAC address of your Ethernet adapter to the DI-604 WAN interface.
Click
Next
Page 12 / 49
12
PPPoE
If you select PPP over Ethernet (PPPoE), you will see the following page.
Enter in the username and password provided to you by your ISP.
Enter in the Service Name if your ISP uses a Service Name for the PPPoE
connection.
Click
Next
PPTP
If you selected PPTP, fill out the required information, provided to you by
your ISP.
Click
Next
Page 13 / 49
At this point, the
Setup
Wizard
has completed.
Click
Restart
to save the
settings and reboot the
DI-604.
The DI-604 will save the
changes and reboot.
You have completed the Setup Wizard.
You can now access the Internet.
Whenever you choose to make changes or additions to the configuration of
the DI-604, you can access the Configuration menu by typing the IP Address
of the DI-604 into the address line of your web browser and pressing “enter.”
Read more about the Configuration menu in the following chapter.
Using the Configuration Menu
Setup Wizard
The Setup Wizard page is the first page that appears when logging into the web-based management
interface. The Setup Wizard is a utility used to quickly configure the DI-604. It will guide you through three
quick and basic steps to help you connect to your ISP. You will be connected to your ISP (Internet
Service Provider) and have Internet access within minutes.
Page 14 / 49
14
WAN
WAN is short for Wide Area Network. The WAN settings can be referred to
as the Public settings. All IP information in the WAN settings are public IP
addresses which are accessible on the Internet.
The WAN settings consist of these options:
Dynamic IP Address
,
Dynamic
IP (w/RoadRunner,)
Static IP Address
,
PPPoE,
and
PPTP
. Select the
appropriate option and fill in the information needed to connect to your ISP.
HOME > WAN > DYNAMIC IP ADDRESS
Choose Dynamic IP Address to obtain IP address information automatically
from your ISP. Select this option if your ISP does not give you any IP
numbers to use. This option is commonly used for Cable modem services.
Host Name:
The Host Name field is optional but may be required by some
ISPs. The host name is the device name of the Broadband Router.
Click
Apply
if you have made changes.
Page 15 / 49
HOME > WAN > STATIC IP ADDRESS
Choose Static IP Address if all WAN IP information is provided to you by
your ISP. You will need to enter in the IP address, subnet mask, gateway
address, and DNS address(es) provided to you by your ISP. Each IP
address entered in the fields must be in the appropriate IP form, which are
four IP octets separated by a dot (x.x.x.x). The Router will not accept the IP
address if it is not in this format.
WAN IP Address:
Public IP address provided by your ISP.
WAN Subnet Mask:
Subnet mask provided by your ISP.
WAN Gateway Address:
Public IP address of your ISP that you are
connecting to.
Primary DNS Address:
Primary DNS (Domain Name Server) IP provided
by your ISP
Secondary DNS Address:
optional
Click
Apply
if you have made changes.

Rate

3.5 / 5 based on 2 votes.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top