D-Link DI-514v2 Router Manual PDF (Setup & Configuration Guide)

Page 31 / 60 Scroll up to view Page 26 - 30

31

Firmware Upgrade

You

can

upgrade

the

firmware of the Broadband

Router at this page. Make

sure the firmware you want

to use is on the local hard

drive of the computer. Click

on Browse to browse the

local hard drive and locate

the firmware to be used for

the update. Please check

the D-Link support site for

firmware

updates

at

http://support.dlink.com

.

Miscellaneous Items

These are additional tools

and features of the

Broadband Router.

Ping Test

This useful diagnostic utility

can be used to check if a

computer is on the Internet.

It sends ping packets and

listens for replies from the

specific host.

Reboot Device

If for any reason the

Broadband Router is not

responding correctly, you

may want to reboot the

Broadband Router.

Tools > Firmware

Tools > Misc

Page 32 / 60

32

Block WAN Ping

- When you “Block WAN Ping”, the DI-514 will not respond

to ping commands from the Internet. Pinging public WAN IP addresses is a

common method used by hackers to test whether your WAN IP address is

valid.

Discard PING from WAN side

: By enabling this option, the DI-514 will not

reply to ping (ICMP) request packets from the Internet.

VPN Pass-Through

- The Broadband Router supports VPN (Virtual Private

Network) pass-through for both PPTP (Point-to-Point Tunneling Protocol)

and IPSec (IP Security). Once VPN pass-through is enabled, there is no

need to open up virtual services. Multiple VPN connections can be made

through the Broadband Router. This is useful when you have many VPN

clients on the LAN network.

Dynamic DNS

- Fill in the required fields to use the Dynamic Domain Server

feature.

Status > Device Info

Device Information

This page in the

Configuration Utility

displays the current

information for the

Broadband Router. It will

display the LAN and WAN,

Wireless information.

If your WAN connection is

set up for

Dynamic IP

address a

Release

button

and

Renew

button will be

displayed. Use

Release

to

disconnect from your ISP

and use

Renew

to connect

to your ISP.

If your WAN connection is set up for

PPPoE

, a

Connect

button and

Disconnect

button will be displayed.

Use

Disconnect

to drop the PPPoE

connection and use

Connect

to establish the PPPoE connection.

This page allows you to observe the DI-514’s working status:

Page 33 / 60

33

LAN

•

IP Address:

LAN/Private IP Address of the DI-514

•

Subnet Mask:

LAN/Private Subnet Mask of the DI-514

WAN

•

IP Address:

WAN/Public IP Address

•

Subnet Mask:

WAN/Public Subnet Mask

•

Gateway:

WAN/Public Gateway IP Address

•

Domain Name Server:

WAN/Public DNS IP Address

•

Wan Status:

WAN Connection Status

Firmware version:

Displays the current firmware version

WAN MAC Address:

Displays the WAN port MAC/hardware address

LAN MAC Address:

Displays the LAN port MAC/hardware address

Status > Log

The Broadband

Router keeps a

running log of events

and activities

occurring on the

Router. If the device

is rebooted, the logs

are automatically

cleared. You may

save the log files

under Log Settings.

First Page

- The first

page of the log.

Last Page

- The last page of the log.

Clear

- Clears the logs completely.

Log Settings

- Brings up the page to configure the logs.

Log Settings

Not only does the Broadband Router display the logs of activities and events,

it can be setup to send these logs to another location.

SMTP Server/IP Address

- The address of the SMTP server that will be

used to send the logs.

Page 34 / 60

34

Email Address

- The email address the logs will be sent to. Click on Email

Log Now to send the email.

Status > Stats

Traffic Statistics

The Broadband

Router keeps

statistics of traffic that

passes through it.

You are able to view

the amount of packets

that passes through

the Router on both

the WAN port and the

LAN port. The traffic

counter will reset if

the device is rebooted.

Status > Wireless

Connected Wireless

Clients List

The wireless client table

displays a list of current

connected wireless clients.

This table also displays

the time and MAC address

of the wireless client

connected.

Page 35 / 60

35

6. Troubleshooting

This chapter provides solutions to problems that can occur during the

installation and operation of the DI-514 Wireless Access Point.

We cover

various aspects of the network setup, including the network adapters.

Please read the following if you are having problems.

(Note:

It is recommended that you use an Ethernet connection to

configure the DI-514 Access Point.)

1. The computer used to configure the DI-514 cannot access the

Configuration menu.

•

Check that the

Ethernet LED

on the DI-514 is

ON

.

If the

LED

is not

ON

, check that the cable for the Ethernet

connection is securely inserted.

•

Check that the Ethernet Adapter is working properly.

Please

see item 6 (

Check that the drivers for the network

adapters are installed properly

) in this

Troubleshooting

section to check that the drivers are loaded properly.

•

Check that the

IP Address

is in the same range and subnet

as the DI-514.

Please see

Checking the IP Address

in

Windows XP

in the

Networking Basics

section of this

manual.

Note:

The IP Address of the DI-514 is 192.168.0.1.

All the computers on the

network must have a unique IP Address in the same range, e.g., 192.168.0.x.

and a Subnet Mask of 255.255.255.0. Any computers that have identical IP

Addresses will not be visible on the network.

•

Do a

Ping test

to make sure that the DI-514 is responding.

Go to

Start

>

Run

>Type

Command

>Type

ping 192.168.0.1.

A successful ping will show four replies.

Rate

Popular D-Link Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share