Page 6 / 17
Scroll up to view Page 1 - 5
6
DI-102 User’s Manual
D-Link Systems, Inc.
LEDs
LEDs
Power
A solid light indicates a proper
connection to the power supply.
Traffic
This LED blinks when traffic is
being classified and prioritized.
LAN
A solid light indicates a connection
to the WAN port of your router. This
LED blinks during data transmission.
WAN
A solid light indicates connection
on the WAN port. This LED blinks
during data transmission.
Page 7 / 17
7
DI-102 User’s Manual
D-Link Systems, Inc.
Using the Configuration Menu
Whenever you want to configure the
DI-102
, you can access the Configuration Menu
by opening the web-browser and typing in the IP Address of the
DI-102
.
Open the web browser.
Type the
IP Address
Type
admin
in the
User name
field.
Leave the
Password
blank.
Click
OK
.
INFO
This screen shows the current status of the
DI-102
.
Using the Configuration Menu
Page 8 / 17
8
DI-102 User’s Manual
D-Link Systems, Inc.
Using the Configuration Menu
Configuration
This allows the
DI-102
to automatically detect the upstream data rate
of your Internet connection. If this box is unchecked, you will need
to specify this value in the
Upstream Data Rate
field.
Enter the upload speed of you Internet connection. This information
should be provided to you by your ISP. If you are unsure of what
this value should be, please check the
Auto Rate Detection
box
or contact your ISP.
Auto Rate
Detection:
Upstream Data
Rate:
Page 9 / 17
9
DI-102 User’s Manual
D-Link Systems, Inc.
Using the Configuration Menu
Configuration
(continued)
Choose either
Auto-detect
,
xDSL modem
, or
Cable modem /
other broadband connection
.
Check this box when you have configured a Static IP address on
the WAN interface of your router.
Auto Rate Detection
may not
work properly if you router has a Static IP configured on the WAN
interface and this option is not selected.
Enter the default gateway IP address that your ISP has assigned
you. This option is only necessary when
Static IP Mode
has been
enabled on the
DI-102
. If you are unsure of what this value should
be, please contact your ISP.
Once you have configured the
DI-102
for Static IP Mode, entered
the ISP Router IP Address, and saved these settings, you will
need to click this button in order for the
DI-102
to detect the upload
speed of your Internet connection.
Connection Type:
Enable Static IP
Mode:
ISP Router IP
Address:
Start Auto Rate
Detection:
Page 10 / 17
10
DI-102 User’s Manual
D-Link Systems, Inc.
Using the Configuration Menu
Admin
Enter the user name that will be used to login to the
DI-102
. By
default the user name is
admin
Enter the password that will be used to login the
DI-102
. By default
there is no password configured.
User name:
Administrator
Password:
19216811.live