D-Link DGS-1224Tv2 Router Manual PDF (Setup & Configuration Guide)

Page 21 / 38 Scroll up to view Page 16 - 20

18

View Trap:

The Trap function can receive the events that happen

from the Web Management Switch in the Monitor List.

There is a light indicator behind the

“View Trap”

button, when the

light indicates in green, it means that there is no trap transmitted, and

else when it indicates in red, it means that there is new trap

transmitted, this is to remind us to view the trap. (Figure 8)

Figure 8.

When the

“View Trap”

button is clicked, a Trap Information window

will pop out, it will show the trap information including the Symbol,

Time, Device IP and the Event occurred. (Figure 9)

The symbol “

” represents the trap signal arise, this symbol will

disappear after you review and click on the event record.

Figure 9.

Note: In order to receive Trap information, switch has to be configured with

Trap IP and Trap Events in Web browser, which are available in the Trap

Setting Menu (see Page 45 for d etail).

Page 22 / 38

19

Add Item:

To add a device to the Monitor List manually , enter the IP

Address of the device that you want to monitor.

Delete Item:

To delete the device in the Monitor List.

Device Setting

You can set the device by using the function key in the Device Setting

Dialog box.

Configuration Setting:

In this Configuration Setting, you can set the

IP Address, Subnet Mask, Gateway, Set Trap to (Trap IP Address),

System name and Location.

Select the device in the Discovery list or Monitor List and press this

button, then the Configuration Setting window will pop out as Figure

10, after filling up the data that you want to change, you must fill up

the password and press the “Set” to process the data changed

immediately.

Figure 10. Configuration Setting

Page 23 / 38

20

Password Change:

You can use this Password Change when you

need to change the password, fill in the password needed in the dialog

box and press

“Set”

button to proceed the password change

immediately.

Figure 11. Password Change

Firmware Upgrade:

When the device has a new function, there will

be a new firmware to update the device, use this function to update.

Figure 12.

Web Access:

Double click the device in the Monitor List or select a

device in the Monitor List and press this

“Web Access”

button to

access the device in Web browser.

Page 24 / 38

21

Toolbar

The toolbar in the Web Management Utility have four main tabs, File,

View, Options and Help.

In the

“File TAB”

, there are Monitor Save, Monitor Save As, Monitor

Load and Exit.

Monitor Save:

To record the setting of the Monitor List to the

default, when you open the Web Management Utility next time, it

will auto load the default recorded setting.

Monitor Save As:

To record the setting of the Monitor List in

appointed filename and file path.

Monitor Load:

To manually load the setting file of the Monitor List.

Exit:

To exit the Web Management Utility.

In the

“View TAB”

, there are view log and clear log function, this

function will help you to show trap setting.

View Log:

To show the event of the Web Management Utility and

the device.

Clear Log:

to clear the log.

In the

“Option TAB”

, there are Refresh Time function, this function

helps you to refresh the time of monitoring the device. Choose

15 secs,

30 secs, 1 min, 2 min and 5 min

to select the time of monitoring.

In the

“Help TAB”

, there is About function, it will show out the

version of the Web Management Utility.

Page 25 / 38

22

Configuring the Switch

The DGS-1224T Web Smart Switch has a Web GUI interface for

smart switch configuration. The Switch can be configured through the

Web Browser. A network administrator can manage, control and

monitor the switch from the local LAN. This section indicates how to

configure the Switch to enable its smart functions including:

u

Port Setting (Speed/Disable, Duplex mode, Flow Control and

Port base QoS)

u

Virtual LAN Group setting (VLAN)

u

Port-based Trunking

u

Port-based Mirroring

u

System Setting

u

Device status and Statistic

Login

Before you configure this device, note that when the Web Smart

Switch is configured through an Ethernet connection, make sure the

manager PC must be set on same the

IP network

. For example, when

the default network address of the default IP address of the Web Smart

Switch is

192.168.0.1

, then the manager PC should be set at

192.168.0.x (where x is a number between 2 and 254), and the default

subnet mask is 255.255.255.0.

Open Internet Explorer 5.0 or above Web browser.

Enter IP address

http://192.168.0.1

(the factory-default IP address

setting) to the address location.

Figure 13.

Rate

Popular D-Link Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share